Page 1 of 1
Late Model Spider Frame on an Early Model Car
Posted: Sat Mar 09, 2019 11:36 pm
by ITA124
Hi All,
As the subject line indicates. I have a 1976 model Spider and want to install a late model convertible roof frame from a circa 1980 model. Do these bolt in? I hear that the header bow is the only difference. Is this correct?
Cheers,
Paul
Re: Late Model Spider Frame on an Early Model Car
Posted: Sun Mar 10, 2019 2:50 pm
by daved
Think the latches are different also.
Re: Late Model Spider Frame on an Early Model Car
Posted: Sun Mar 10, 2019 6:08 pm
by samakijoe
Reading the header, I thought he was trying to transplant a new under carriage/running gear to an old body.
I thinking, that would be a real bag of worms..
Re: Late Model Spider Frame on an Early Model Car
Posted: Mon Mar 11, 2019 8:33 am
by DieselSpider
Not sure however I see three different convertible top frames listed for the 124 Spiders and they are sold without the front bow. Its not apparent if the difference is just the tint of the rear side windows or not.
See:
https://www.midwest-bayless.com/c-19-to ... 4SC-0.aspx
Re: Late Model Spider Frame on an Early Model Car
Posted: Mon Mar 11, 2019 10:22 am
by MattVAS
It is just the header bow that is different. And yes the latches may be different depending on exactly which year you get the top frame from.
That said the latches don't really matter as they are still lined up in the same spots so just use the ones that fit the header bow.