SoCal Mark installed his perf. cams a few weeks back. All I can say is...WoW!!!...Great Power, Great pull from 2500 to about 4600...really gives the spider that extra edge where we need it and drive it. I have to say, I was tempted to buy a bigger cam, but this one really builds good power down low where we need it. Great investment!...thanks Mark.
Tom
Mark's Cam Upgrade....Awesome!!!
-
- Posts: 232
- Joined: Wed Aug 06, 2008 12:07 am
- Your car is a: 1977 Lancia Scorpion
- Location: WA
Re: Mark's Cam Upgrade....Awesome!!!
More details? Specs, price, etc?
Re: Mark's Cam Upgrade....Awesome!!!
Mark..specs/price??..2 for 1?..hehe
RJ80 wrote:More details? Specs, price, etc?
Re: Mark's Cam Upgrade....Awesome!!!
cam specs are;
285 duration, 210 duration at .050 lift
.385 lift, opening/closing at 34/72
Cams are $250 a pair exchange.
They have a slightly lumpy idle, will pass a smog check in Calif and make good power from 2500 to 6000 rpm. Great street cams for stock or slighly modded engines.
285 duration, 210 duration at .050 lift
.385 lift, opening/closing at 34/72
Cams are $250 a pair exchange.
They have a slightly lumpy idle, will pass a smog check in Calif and make good power from 2500 to 6000 rpm. Great street cams for stock or slighly modded engines.
-
- Posts: 232
- Joined: Wed Aug 06, 2008 12:07 am
- Your car is a: 1977 Lancia Scorpion
- Location: WA
Re: Mark's Cam Upgrade....Awesome!!!
Well, I bit the bullet on a pair of Mark's cams too and had him install them during a recent timing belt change. I also had Mark install my 34adf and 1800 manifold on my '79 and I'm thrilled with the result. The car finally (finally!!) drives like I think it should, with ample power and a much more free-revving nature. I was limping along on the freeway at 65 mph all the way to Mark's shop and was doing 80+ in the fast lane the whole way home with the feeling that there was more to go. Mid-range pickup was greatly improved with no noticeable loss to the bottom end.
Chalk me up as another happy customer
Chalk me up as another happy customer
Re: Mark's Cam Upgrade....Awesome!!!
Ordered a set last week ... Excited to see how they work. Doing a lot of changes at once though, so it'll be tough to tell the benefits of each individual upgrade (electronic ignition, 32/36 carb, cams, changing leaky gaskets and adding a free flowing air intake). This thing should rock ... can't wait.