Cam tower studs

Keep it on topic, it will make it easier to find what you need.
Post Reply
User avatar
70spider
Posts: 676
Joined: Fri Mar 14, 2014 3:05 pm
Your car is a: 1970 Fiat spider
Location: N.E. New Mexico

Cam tower studs

Post by 70spider »

I am having a hard time locating new studs for my rebuild. The few of the old studs are less than ideal so I would like to just replace them all with new. However, I can not find an online source. Does anyone know of a source for new studs? The sizes I need for the just the cam tower are: 8mm x 91mm, 8mm x 66mm, and 8mm x 51mm. They are double end with the threaded ends being 22mm and 14mm. I would hate to spend a couple of grand on this motor only to be let down by old rusted studs.
1970 Fiat Spider 124 Sport aka "Pesto"
2002 Mazda Protege5
2013 Buddy 170i
Top
User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: Cam tower studs

Post by RRoller123 »

http://www.belmetric.com is a great hardware source, they seem to have pretty much everything.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
Top
User avatar
aj81spider
Patron 2020
Patron 2020
Posts: 1526
Joined: Fri Mar 11, 2011 9:04 am
Your car is a: 1974 Fiat 124 Spider
Location: Chelmsford, MA

Re: Cam tower studs

Post by aj81spider »

I was actually able to find a bunch at my local auto parts store.
A.J.

1974 Fiat 124 Spider
2006 Corvette
1981 Spider 2000 (sold 2013 - never should have sold that car)
Top
klweimer
Posts: 550
Joined: Tue Mar 27, 2012 7:45 am
Your car is a: 1982 Spider 2000
Location: Arvada, Colorado

Re: Cam tower studs

Post by klweimer »

McMaster Carr is my favorite. http://www.mcmaster.com
Kirk
Top
Post Reply

Return to “Engine and Tuning”