I am installing my new seals between the wing frame and the windshield frame. I have a different frame, so the holes dont line up. I also dont have a top to test with. I want to know if the seal in the picture has the right vertical location or does it need to be higher.
If anyone could post picture of their current set up would be appreciated.
thanks,

Here are my 81 and 74. Caveat on the 81 is that it might have been changed by the PO. When I got it the vent windows wouldn't close and I needed to do some exacto knife work to make it close. So if it looks screwy it might be. The 74 is stock to the best of my knowledge.

81:




74:



Let me know if you need different angles.

Do they just slide in or glued in

thanks, AJ.