I have my top removed for refinishing. Since most of the rust is in the vicinity of the rear fixed window, I'd like to remove it, treat the rust and install fresh seals. I've removed the chrome pillar trim, but the glass appears to be crimped in from the perimeter frame. Does anyone have any tips for removal? I can see myself breaking the glass real easily.

Thanks!

Bryan

Just did mine yesterday. I drill a 1/8 hole in the corner and i used a punch to slide the window out. Work gereat for me

John

Ah, great idea. Will give it a try.

Bryan

Ok, been prodding, soaking and yanking on these damn windows for few weeks now. Drilled holes in the back of the frame and used wood dowels to try to drive out the windows. No dice. Gotten one to move about 1/32" and it just shattered when prying from one of the holes. Knew this was going to happen.

Now, just how unobtainium are these windows? Any ideas? This really sucks.

Thanks.

i have some if you need
in the frame