Page 4 of 7
Re: 1982 Fiat Spider 2000 restoration project
Posted: Sat Feb 17, 2018 9:47 am
by royn
Thanks RRoller 123 !
Normally the snow melts quite fast and we can start the season about same time as you in mid-April. May 1 is sort of an opening day for the season. This year might bring some issues regarding flood problems and its still early and we will have more snow coming
Re: 1982 Fiat Spider 2000 restoration project
Posted: Sat Feb 17, 2018 12:52 pm
by RRoller123
Good luck, clear and cold here in Eastern MA too.
But no snow along the coast here in Plymouth!
Re: 1982 Fiat Spider 2000 restoration project
Posted: Mon Feb 19, 2018 6:31 am
by Justice777
Picked up another 7" - 8" in So. Maine...Yay. I see suppose to hit 70' Wed. Crazy.
My finish date is June 1, but having never done this before IDK if that's reasonable or not considering I only work on it weekends.
Re: 1982 Fiat Spider 2000 restoration project
Posted: Thu Apr 12, 2018 2:32 pm
by royn
I am not to happy with the progress, but some things are moving forward ! Here are some updates.
Crossmember painted
gas tank finished
Engine compartment
alu flywheel installed
I decided to install engine / transmission as one piece.
Doing it this way its a very tight fit and not a lot of room to play !
Engine finally installed and crossmember fitted.
Re: 1982 Fiat Spider 2000 restoration project
Posted: Thu Apr 12, 2018 6:39 pm
by RRoller123
Nice!
Re: 1982 Fiat Spider 2000 restoration project
Posted: Sat Apr 21, 2018 2:22 am
by Ptoneill
Beautiful work!! I also put my engine and transmission in as one unit....very tight fit but worth it! Again very nice job!
Re: 1982 Fiat Spider 2000 restoration project
Posted: Sun Apr 22, 2018 4:57 pm
by royn
Thanks Ptoneill,
I have been following Your tread and its been a great motivaton for me !
Re: 1982 Fiat Spider 2000 restoration project
Posted: Tue May 01, 2018 5:55 pm
by royn
Some more updates. I have installed front suspension and brakes. I had to change the bushings in both upper and lower Control arms.
I used Vogtland lowering springs, front and rear.
Front brakes
Rear brakes
New exhaust headers
Stainless steal all the way
Re: 1982 Fiat Spider 2000 restoration project
Posted: Tue May 01, 2018 9:47 pm
by sweet124
Nice work what type of control arm bushings did you use.
Re: 1982 Fiat Spider 2000 restoration project
Posted: Wed May 02, 2018 2:10 pm
by royn
I put on new rubber bushings a few years back. The car dosent have many miles on and i was suprised to discover that the bushings was bad. This time i try the polyurethane bushings and hope that they will last longer.
Re: 1982 Fiat Spider 2000 restoration project
Posted: Wed May 02, 2018 7:39 pm
by sweet124
Nice work .keep them coming.love all those detail pictures.
Re: 1982 Fiat Spider 2000 restoration project
Posted: Sun May 13, 2018 6:09 pm
by royn
Re: 1982 Fiat Spider 2000 restoration project
Posted: Mon May 21, 2018 5:14 pm
by royn
Last days have been quite busy, many minor details to be fixed. I feel that i have reached a turning point. Finally ground contact after almost two years.
Next stop Paint Shop !
Re: 1982 Fiat Spider 2000 restoration project
Posted: Mon May 21, 2018 10:43 pm
by DRUMMOND
Hi royn
good to see progress! are you keeping it red?
Re: 1982 Fiat Spider 2000 restoration project
Posted: Mon Jun 18, 2018 3:07 pm
by familyman
I love reading of your progress; it gives me incentive to keep on working on mine.