Great build! Thank you for sharing the process!!

Great Job !!!

Will you replace the licence plate lights with originals ? , I have just replaced my bumpers and still need to remove the old licence lights… have found the light fittings that insert into the ends of the bumpers at Spider Point… Just to complete the look.

Enjoying your progress

Cheers
John

thank you both. Regarding the licence plate lights, not sure which way to go really. I should have planned this better, and filled in the holes on the rear panel and used the the lights that fit on the rear bumper. Got to put some thought into this.....
Love to see your conversion.

Cheers will keep you in the loop…

Will be installing mine in January when I'm on short leave , got the same problem but will just use hole infills until my beater can fix it up… also contemplating early turn signals but not sure if the cut out holes are bigger, if so I won't go there…




Cheers
John

yeah, the holes on the early models were smaller.
fit of the bumpers on your car looks good!

winsscreen panel now painted and fitted.

I have heard that the old style bumper license plate lights are not fitting correctly on the replica stainless steel bumpers. Has anyone made this work? I have the stainless bumpers and I would like to get Spider Points plate lights but I would like the opinion of someone who has done this...of course photos are always good!

Love your car!!

thank you!
Haven't got that far yet (regarding lights), but i'll keep you posted....

The OEM plate lights do not fit the Harrington SS bumpers. I fabricated a fit using dome style lights for pick up truck bumpers. I posted pictures on an earlier thread. "License Plate Light Mod" posted March 30.

azruss wrote:The OEM plate lights do not fit the Harrington SS bumpers. I fabricated a fit using dome style lights for pick up truck bumpers. I posted pictures on an earlier thread. "License Plate Light Mod" posted March 30.

Thank you very much for the info.

Merry Christmas!

weather in UK has not been on my side this winter, it's non stop rain all the time, so progress on my resto is on the slow side, so i got on with cleaning the jack instead!
Mind you this weekend the sun came out for a bit so the rear brake pipes, hand brake and calipers are now on the car....

beautiful work!

thank you. Enjoying it!

what on your spring on the back?
I would like to know , how do u know we're all the stuff under the dash goes, and the wiring?
I realize there are wire diagrams but still

fiat218 wrote:what on your spring on the back?
I would like to know , how do u know we're all the stuff under the dash goes, and the wiring?
I realize there are wire diagrams but still

hi, the spring came with that plastic netting, which i believe acts as an anti squeak. Regarding the wiring and the rest of the build, i simply took hundreds of photos, and on every connector and junction pair i put masking tape and wrote a note or a matching number. Time will tell if any of that will be of help!