Sorry if this has been covered. What wheels are you running? Any pictures?
BTW: Nice build

Hi Lanciahf I used to own a Lancia HF Lusso 1973 1600 twin cam V4

Wheel info and photo below

https://cdn.shopify.com/s/files/1/1500/ ... 1521586027
<a target="_blank" href="http://imageshack.com/f/pmOlwTPdj"><img src="https://imagizer.imageshack.com/v2/150x ... OlwTPd.jpg" border="0"></a>
<a target="_blank" href="http://imageshack.com/f/pogE3q6Qj"><img src="https://imagizer.imageshack.com/v2/150x ... gE3q6Q.jpg" border="0"></a>

Hi Drummond,

I really like your left side mirror, it is just beautiful. Where did you bought it?

And maybe you can help me on that one...Do we need to remove the left door inner cardboard in order to replace the side mirror?

I thank you very much in advance.

HI Lanciahf

Here are the photos. Volumex wheels from AR

Hi Quebecfiatspider

Here is the info:
https://www.amazon.com/gp/product/B00F0 ... UTF8&psc=1


You have to take off the door card to install if you want to use the signal. If no signal you do not have to remove the door card

Also the mirror does not fit the original screw holes in the door. you need some SS self taper screws

I purchased my side mirrors with signal arrows from a different vendor. They are similar to the ones in the above link. I also purchased a third brake light I installed on the top of my windscreen from this vendor. The link is below

https://www.rodworx.com/product-categor ... w-mirrors/

DRUMMOND wrote:Hi Quebecfiatspider

Here is the info:
https://www.amazon.com/gp/product/B00F0 ... UTF8&psc=1


You have to take off the door card to install if you want to use the signal. If no signal you do not have to remove the door card

Also the mirror does not fit the original screw holes in the door. you need some SS self taper screws

Thanks Drummond, it is really appreciated

What a Beautiful job !
But please get the car off those wretched cinder blocks and onto ramps , or jack stands , or anything safe . Cinder blocks are apt to crumble ,if they do the car will be damaged which would be a pity , even worse you might just be under the car when it happens . This could be a tragedy !
Cheers
Maxdog

Hi Maxdog

You can rest easy, Standing on the ground now Thanks for the concern.

Trunk space is now complete



Bonnet/hood is nearly complete. Could see the light of day in 2 weeks!! All going well.

Fantastic work, infinite patience.

Right! I would have been driving it like it was 4 pages ago with no doors!

Hood installed today, Stereo fired up, and then!

Time for the car to come out of the cave!! Success beyond believe!! everything worked great!! went about 10 miles no drama whatsoever!
Now have to get the alignment done and some other little stuff and we are complete.
From July 2016 to August 2018 Whew!!









From here: (Beginning)

To Here (lowest point)

To Here (complete)



Upgrades:
Electric doors/trunk lid
Auto on/off Main lights
Daytime running lights
Bluetooth Stereo
All new ground pods
2 new fuse boxes
All lights LED except main light Halogen H4
Relays for: Starter, Ignition, Wipers, Headlights,Windows, Fan, Doors, Trunk Lid, Air horn, Auto mainlights,Amp

It's been an amazing journey that I've been following pretty closely. Your work is fantastic.

You should be really proud - and it's great that you can enjoy it now.