Mechanic's Creeper

General chat about the car goes in here.
Post Reply
EddieJames

Mechanic's Creeper

Post by EddieJames »

Does anyone have a good recommendation for a creeper?

I was looking at this one:

http://www.topoftheline-travel.com/mech ... eeper.html

Image
So Cal Mark

Re: Mechanic's Creeper

Post by So Cal Mark »

I prefer the ones that are as low as possible, but it sorta depends on how high you can raise your car
User avatar
maytag
Posts: 1789
Joined: Mon Oct 19, 2009 9:22 pm
Your car is a: 1976 124 spider
Location: Rocky Mountains....UTAH! (Not Colorado)

Re: Mechanic's Creeper

Post by maytag »

I'm with Marc on this. Find a low-slung creeper, wherre the wheels are out-board and the creeper barely clears the floor.
And for all the rest of what that one does: buy a 5-gal bucket and invert it. :lol:
I'm no Boy-Racer..... but if I can't take every on-ramp at TWICE the posted limit.... I'm a total failure!
NJFIAT1981
Posts: 1490
Joined: Sat Mar 21, 2009 11:55 am
Your car is a: 1970 SPIDER AND A 1976 SPIDER
Location: New Jersey

Re: Mechanic's Creeper

Post by NJFIAT1981 »

I use Manny Moe and Jacks creeper. Does the job and not too much money
User avatar
wachuko
Posts: 1175
Joined: Thu Feb 04, 2010 10:56 pm
Your car is a: 1981 Fiat 2000 Spider
Location: Orlando, FL USA
Contact:

Re: Mechanic's Creeper

Post by wachuko »

So Cal Mark wrote:I prefer the ones that are as low as possible, but it sorta depends on how high you can raise your car
+1

I got this one:

Image

and for bench/seat:

Image

54.00 for both... after squating to work the cars and needing knee surgery, I don't squat anymore and avoid using cans or buckets that can slide out under you... :( :roll: I am not 16 anymore, lol
Drive Safe!
Wachuko

1981 Fiat Spider Progress thread
1967 912 Progress Thread
1981 911 SC Coupe RS Transformation
1983 911 SC Coupe RSR Transformation
1991 964 C4 Cabriolet Progress Thread
2012 BMW X5 xDrive35d
2015 FIAT Abarth
EddieJames

Re: Mechanic's Creeper

Post by EddieJames »

That's the ticket right there, inexpensive too.

Here's the direct link: http://www.harborfreight.com/heavy-duty ... 46087.html
User avatar
fiasco
Posts: 885
Joined: Sat Jul 05, 2008 2:10 am
Your car is a: 1969 Fiat Spider
Location: Ontario, CA

Re: Mechanic's Creeper

Post by fiasco »

I don't have any kind of lift, so I'm generally working under the car on jack stands. Rarely does it get up high enough for me to use my creeper - it always ends up hanging on the wall while I slide around under the car on the ground.

-- se
Steve Eubanks
-----------------------------------------------------------------------------------------------------
1969 Fiat 124 Spider AS | 2108 Fiat 124 Spider Classica | http://calstylestudio.com
Fiat88

Re: Mechanic's Creeper

Post by Fiat88 »

fiasco wrote:I don't have any kind of lift, so I'm generally working under the car on jack stands. Rarely does it get up high enough for me to use my creeper - it always ends up hanging on the wall while I slide around under the car on the ground.

-- se
Similar scene in my garage... :lol: :wink:
User avatar
Zippy
Posts: 585
Joined: Mon May 25, 2009 10:06 pm
Your car is a: 1978 Fiat
Location: Real Close to Milton, WA

Re: Mechanic's Creeper

Post by Zippy »

I have an old wooden creeper with the angled metal wheels. It is fairly low slung but because my car is lowered it is difficult to use even with the car on the jacks as high as they will go. Most of the time I throw an old piece of carpet under the car to keep clean and slide around a little eaisier. It's not as cold either. I mostly use the creeper when working on my pickup.
1978 Spider
htchevyii
Patron 2022
Patron 2022
Posts: 1807
Joined: Thu Jan 17, 2008 9:31 pm
Your car is a: 1982 Spider hers 1972 Spider his
Location: Hydesville, CA (NorCal)

Re: Mechanic's Creeper

Post by htchevyii »

I have a pretty nice one, but never use it. I just seems to be more of a hassle than a benefit. Now if I could just find a way not to have to get up and down 400 times everytime I work under a car I'll be happy, (car lift) :wink: Maybe I can train the dog to bring tools? I did put all of my sockets on one board and that helped a little. I'm not messing around with any of the low height lifts, I'll just have to hold out until I can build a shop and get a full height one.
Trey
Image
1982 SPIDER 2000, 1964 CHEVYII, 1969 Chevy Nova, 2005 DODGE RAM, 1988 Jeep Comanche
1972 Spider, 78 Spider rat racer 57 f-100,
ChrisSRT
Posts: 67
Joined: Sun Feb 21, 2010 11:11 am
Your car is a: 1978 Spider

Re: Mechanic's Creeper

Post by ChrisSRT »

Dog Bone Creeper here. Low, stable and goes over stuff fairly easily due to the large wheels. Not cheap, but I actually use it because it is low enough and doesn't get stopped by the cord of my drop light, unlike the cheap ones I've had before.
http://www.northerntool.com/shop/tools/ ... 9656_19656
spider2081
Patron 2024
Patron 2024
Posts: 3015
Joined: Fri Jan 27, 2006 11:45 pm
Your car is a: 1981 Spider 2000
Location: Wallingford,CT

Re: Mechanic's Creeper

Post by spider2081 »

For me creepers have limited use. I like "movers quilts" and or foam pads that are made for floors. I dislike the way creepers move when I am trying to force someting. I bought a "seat" cover for a 5 gallon pail and think its handy.
User avatar
RoyBatty
Posts: 852
Joined: Sat Aug 28, 2010 11:44 pm
Your car is a: 1975 124 Spider - 1971 124 Sport Coupe
Location: Locust Grove, VA

Re: Mechanic's Creeper

Post by RoyBatty »

Something to watch out for with a creeper.
Try to get one with the casters placed a couple inches in from the edge of the frame.
I have had the casters pinch my arm flesh between the frame or between the wheel and its axle frame in the past.
It hurts like hell.
TX82FIAT
Posts: 1814
Joined: Mon May 03, 2010 11:04 am
Your car is a: 82 Fiat Spider 2000 CSO
Location: San Antonio

Re: Mechanic's Creeper

Post by TX82FIAT »

This one for $25.99 at Harbor Freight works well depending on height of jacks and width of individual under car.

http://www.harborfreight.com/automotive ... seats.html
Buon giro a tutti! - enjoy the ride!

82 Fiat Spider 2000
03 BMW M3
07 Chevy Suburban
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Mechanic's Creeper

Post by spiderrey »

That king crawler from northern looks cool. I have 2 creepers right now, an old wooden one that gets stuck on everything, and one I got from that big speed shop that always send out huge catalogs. The new one has magnetic trays on both sides for tools and is comfortable. For those of you that say you cant get your car up high enough to use your creeper, you need taller jack stands. They are not that expensive. When I dont set my car up on the taller stands, i use 4' x 4' pieces of cardboard that I take from work when they are being thrown away. Very easy to store between the roll away and the wall, slides easily on the floor, great for oil changes, when soiled simply trash it and grab another piece.
Post Reply