Inside clips for sun visors

KensSpider · Post by **KensSpider** » Fri Apr 06, 2007 3:23 pm

My '75 had both sun visors missing when I bought it. I have found the visors themselves and have them in hand. The chrome outside attachment is in place on both sides (driver & passenger).

But whatever is supposed to be on the inside (both driver & passenger sides) is still missing so I can't install the visors.

Any idea for a source for these two thingys? IAP doesn't show them.

The sun peaked out today and ... well ... you know!!

Thanks in advance!!

Cheers!!

Ken

brad131a4 · Post by **brad131a4** » Fri Apr 06, 2007 4:29 pm

I have a parts car and I'll check to see if they are on it if so there yours for a very small fee for shipping if needed.

KensSpider · Post by **KensSpider** » Fri Apr 06, 2007 5:37 pm

brad131a4 wrote:I have a parts car and I'll check to see if they are on it if so there yours for a very small fee for shipping if needed.

Happily paid ... just let me know!!

Cheers!!

Ken

mbouse · Post by **mbouse** » Fri Apr 06, 2007 5:41 pm

mine are not held on by clips, they are held on by a plastic part that allows the shade to pivot up and down only.

they were not designed to shade you on the side window....only the windshield.

as I recall, the black plastic clip comes with a new set of visors.

and, as true with most of our vendors.....not everything they gladly stock and sell is listed in their catalogues. frequently you should call or email them for those hard to find items. you will be presently surprised on occasion.

brad131a4 · Post by **brad131a4** » Tue Apr 10, 2007 10:14 pm

Well finally checked all my extra parts boxes and car and no luck on the clips . Sorry. I know what you're looking for and think that you might be able to exchange it with another one from a different car like a 70's rabbit as the visors look almost identical. Good luck.

manoa matt · Post by **manoa matt** » Wed Apr 11, 2007 7:19 am

Here are some for a 2000, appaently they have a 8mm shaft. I think earlier years had a smaller shaft. Ask him if he's got the smaller version. Good thing about plastic is that it can be filed, sanded, or milled to a smaller size.

http://cgi.ebay.com/ebaymotors/Fiat-200 ... 8360QQrdZ1

Matt

manoa matt · Post by **manoa matt** » Fri Apr 13, 2007 9:42 pm

Here are the clips you need. I've bought stuff off this guy before, pleasure to deal with.

http://cgi.ebay.com/ebaymotors/124-Fiat ... 7567QQrdZ1

Matt

mdrburchette · Post by **mdrburchette** » Fri Apr 13, 2007 10:05 pm

I've bought from him too and was impressed with the quick service.

KensSpider · Post by **KensSpider** » Fri Apr 13, 2007 10:26 pm

Thanks guys ... I just purchased them from him ...

Cheers!!

Ken

Inside clips for sun visors

Inside clips for sun visors

sunvisor clips