need help with a part

[81SPIDERMATT]

81 spider 2000... getting ready to rplace donut and center drive shaft support and i think i found the rattle.. going from front to rear...donut ...then a grease fitting...then some type of cover that i think should have a seal....no seal...cover is just rattling ... does anyone no the part number ... my haynes manual just calls it a seal.... new to fiat and iap website or catalog is not showing what i think i need....thanks

[redek]

PM your email address to me, I have a copy of the Fiat Manual. Hopefully it will help.

[81SPIDERMATT]

pm sent....thanks..... matt

[81SPIDERMATT]

OK HAYNES MANUAL AND FIAT MANUAL AE SAYING THE SAME THING..... DUST COVER AND SEAL.... IAP SHOWA A BOOT BUT IT IS DISCONTINUED .... JUST BEHIND DONUT IS GREASE FITTING THEN A DUST COVER AND WHAT LOOKS LIKE USED TO BE SOME TYPE OF SEAL OR BOOT... THAT IS NOW MISSING AND AT 2500 TO 3500 RPMS THAT DUST SHEILD IS RATTLING... GREASE FITTING DOES NOT FILL THE DUST SHIELD....GUESS I AM GOING TO HAVE TO TRY AND FIND SOME TYPE OF FAT RUBBER WASHER TO MODIFY TO REPLACE THE SEAL......ANY IDEAS OR ANY BODY THAT HAS RUN INTO THIS BEFORE WOULD BE HELPFUL....THANKS

[seabeelt]

Picture???

[81SPIDERMATT]

sorry no camera.. but it came off with the 3 bolt piece when i changed the donut..after closer inspection it is the front axle dust cover..rattles a little but i think that the grease fitting will solve that...just finished center bracket ..new donut..and u joints..what a difference