Fiat 850 coupe bodywork catalogue

[swede]

Hey,

I´m looking for a Fiat 850 coupe bodywork spare parts catalogue series 2 (1971)
it can be a copy or original I just need to get hold of the rigth body parts numbers.

/Robert

[kmead]

I have one for a series two USA model. Aside from the bumpers and the high back seats, I believe its the same as the European version.

Is there a particular set of parts of the car you need the pages for? I can scan a few before Wednesday, but if you need a lot of the book I won't be able to do it until next weekend.

[swede]

Love to get my hands on the whole book if possible.
Have you any good source where to buy bodywork parts?

[kmead]

Sadly no. I know there are more parts in Europe than over here. The 850 Sport Coupes were not a high seller over here and are exceedingly rare due to the amount they rusted in the US. Parts were either used to salvage the ones that were repaired and many parts were scrapped in the 80s when Fiat pulled out of the US market.

I will see when I can fit in getting it scanned in. Unfortunately it isn't loose leaf so its a bit more difficult to do compared to the 124 Sport Coupe one I have.

I will let you know when its ready.

Karl

[Snoopy]

Maybe some of the german dealers have 850 Parts...
H&N http://www.850fiat.de/
http://www.abarth-online.de/epages/6209 ... Blechteile

[swede]

Thanks Snoopy, I totally forgot to check H&N

[swede]

Sadly no. I know there are more parts in Europe than over here. The 850 Sport Coupes were not a high seller over here and are exceedingly rare due to the amount they rusted in the US. Parts were either used to salvage the ones that were repaired and many parts were scrapped in the 80s when Fiat pulled out of the US market.

I will see when I can fit in getting it scanned in. Unfortunately it isn't loose leaf so its a bit more difficult to do compared to the 124 Sport Coupe one I have.

I will let you know when its ready.

Karl

The most critical at this moment is the body parts underneeth the fenders and front window.
I got some rust in the window corners and need to know if there is body parts for that or if I have to fabricate it myself.

[kmead]

I should be able to scan the majority of it tomorrow. I will put it on my drop box public folder and send you the link. Once you have it if you could host it for others I would greatly appreciate it.

I will post and IM you here on the forum when I have it for you.

Karl

[swede]

Karl,

I have no problem hosting the information to everybody here.

/Robert

[kmead]

A good evening. My apologies I didn't get to scan the pages until the end of the day yesterday and today I was installing a new computer for my wife.

The file is here:

http://dl.dropbox.com/u/3359580/Fiat%20 ... 0Parts.pdf

Its a fairly small file (the originals were about 60mb) after processing. The quality is fairly good, its an old book and I didn't want to break the back of the binding so there are a few pages which are missing a bit of their header. I omitted a few blank pages to reduce the size.

Let me know if anything is not clear and I can either reprocess those pages or rescan them.

Karl

[swede]

Thanks Karl, that was just what I was looking for.
Im building a new website http://www.strigin.se and all my material will be displayed there for downloading.
Its not up and running yet but it will be soon.

[kmead]

I will also post one for the 124 Sport Coupe (BC body) next week. It should turn out a bit better as the pages can be removed unlike the book for the 850 which is perfect bound.

I hope some find it useful.