Working or bad?
Working or bad?
OK, when I put on the brakes my car pulls to the right. Is this the right brake working properly and the left side not? Or, the other way round? Although, it does seem that my pull to the right is the right brake sticking a bit because sometimes it does not pull. Any one had similar problems?
Re: Working or bad?
If you are speaking of a spider, more than likely your Calipers are due for an overall. Good time to bleed the lines and replace the brakes too.
- kilrwail
- Posts: 1100
- Joined: Wed Mar 04, 2009 6:49 am
- Your car is a: 1978 Fiat 124 Sport Spider
- Location: Perth, Ontario
Re: Working or bad?
If it pulls to the right, the right brake is working. When it doesn't pull, I suspect the left one works intermittently. The piston in the left calliper may be binding - time for a rebuild.
_____________________________________________________________
Peter Brownhill
1978 Fiat 124 Sport Spider - original owner
1977 Porsche 911S - track car
2022 Ram 4 x 4 - hauler
PCA National Instructor and Motorsport Safety Foundation Level 2 Instructor
Peter Brownhill
1978 Fiat 124 Sport Spider - original owner
1977 Porsche 911S - track car
2022 Ram 4 x 4 - hauler
PCA National Instructor and Motorsport Safety Foundation Level 2 Instructor
-
- Posts: 548
- Joined: Tue Oct 27, 2009 10:17 pm
- Your car is a: 1982 Spider
- Location: Cincinnati OH
Re: Working or bad?
Katsi,
Typically, if it pulls to the right when you are NOT applying the brakes, the right front caliper is sticking ON.
If it pulls to the right when you ARE applying the brakes, the left caliper is NOT engaging.
Typically, if it pulls to the right when you are NOT applying the brakes, the right front caliper is sticking ON.
If it pulls to the right when you ARE applying the brakes, the left caliper is NOT engaging.
Steve
1982 Red Spider 2000
1919 Old Town Sailing Canoe
1982 Red Spider 2000
1919 Old Town Sailing Canoe
-
- Posts: 1833
- Joined: Wed Mar 24, 2010 10:45 pm
- Your car is a: 1975 Spider
- Location: clermont fl
Re: Working or bad?
when doing work to the brake system, always do the repairs on both sides at the same time, or you will gert an unballanced effect, (pull), i very strongly recomend replacing the brake hoses as well, they can be the source of many pulling problems.
the rubber breaks down, internally, causing the fluid not to return back to the master cylinder. also causing a pulling effect.
the rubber breaks down, internally, causing the fluid not to return back to the master cylinder. also causing a pulling effect.
Automotive Service Technology Instructor (34 year Fiat mechanic)
75 spider , 6 Lancia Scorpions, 2018 Abarth Spider, 500X wifes, 500L 3 82 Zagatos. 82 spider 34k original miles, 83 pininfarina, 8 fiat spider parts cars
son has 78 spider
75 spider , 6 Lancia Scorpions, 2018 Abarth Spider, 500X wifes, 500L 3 82 Zagatos. 82 spider 34k original miles, 83 pininfarina, 8 fiat spider parts cars
son has 78 spider