Hi guys
I'm looking at the Vick Autosport 15" Pro-Race 1 wheels for my '76 Spider. They are towards the bottom of their catalog on page 51. I really like the look, but am concerned about going from 13" to 15" wheels. I've seen posts that mention it may not be best to go larger than 14" with stock suspension. I would plan on using a 205/50/15 tire which should get me real close to the same outside diameter as the stock tire/wheel combo. Has anyone had any experience with setup? does anyone have any pictures of them installed?
Thanks for the info
Josh
Has anyone used Vick Autosport 15" Pro-Race 1 Wheels?
-
- Posts: 3959
- Joined: Sat Dec 27, 2008 2:14 am
- Your car is a: 1980 124 spider
- Location: Naramata B.C.
Re: Has anyone used Vick Autosport 15" Pro-Race 1 Wheels?
Hi there. I and I believe a number of members are running 205-50-15 on our fiats. Mine are Toora wheels but I suspect they would all be similar. Mine is on a post May 13 "out of the paint shop". I had IAP stiffer springs and chopped 1 coil rear and left the fronts alone as the lower member in the suspension was at an approx 5-10 deg slope upwards where ideal evidently is parallel with the road.
80 FI spider
72 work in progress
2017 Golf R ( APR Stg. 1)
2018 F350 crew long box
72 work in progress
2017 Golf R ( APR Stg. 1)
2018 F350 crew long box
- Curly
- Posts: 526
- Joined: Tue Feb 12, 2008 1:09 am
- Your car is a: 1968 AC Coupe and a 1976 CS1 Spider
- Location: Gippsland - Victoria, Australia
Re: Has anyone used Vick Autosport 15" Pro-Race 1 Wheels?
These are a two-piece 15 x 7 Simmons V4 wheel (Aussie after-market wheel originally intended for Alfettas), I'm using 205/50/15 tyres and although the car is lowered somewhat, there are no clearance problems.
Curly from Oz
124AC coupe http://gallery.italiancarclub.com/124og ... -AC-coupe/
124CS1 spider http://gallery.italiancarclub.com/124og/curly/album52/
124AC coupe http://gallery.italiancarclub.com/124og ... -AC-coupe/
124CS1 spider http://gallery.italiancarclub.com/124og/curly/album52/