Lancia block in a fiat
Lancia block in a fiat
the block in my fiat has Lancia cast on the high rear of the driver side. Might this be appropriate for an 83 or did a PO do a swap?
Re: Lancia block in a fiat
That is a swap out by PO. Very common to find part that are interchangable among Fiat companies, hunted down by owners and installed . No I dont think it is factory.
Last edited by pope on Wed Apr 01, 2009 7:35 am, edited 1 time in total.
- perthling
- Posts: 349
- Joined: Wed Jan 09, 2008 11:04 pm
- Your car is a: 1974 124 Spider
- Location: Western Australia
Re: Lancia block in a fiat
Check the engine number on the block. Fiat engines will start 132A... or similar, from memory the Lancia engines start with 828.
_______________________
Perthling
1974 Fiat 124 Spider (blade bumper 1756cc)
1974 Fiat 124 CC (same family since new)
1975 Fiat 124 CC (project)
1969 Fiat 124AC (project)
1997 Coupe Fiat 20VT (daily driver)
http://www.fiatlancia.org.au
Perthling
1974 Fiat 124 Spider (blade bumper 1756cc)
1974 Fiat 124 CC (same family since new)
1975 Fiat 124 CC (project)
1969 Fiat 124AC (project)
1997 Coupe Fiat 20VT (daily driver)
http://www.fiatlancia.org.au
-
- Posts: 909
- Joined: Thu Sep 13, 2007 11:26 am
- Your car is a: 1982 Fiat Spider 2000 Turbo
- Location: Ohio
Re: Lancia block in a fiat
I have an '82, and if memory serves me correctly, I have Lancia stamped on my block as well. And I know that it is the original block. As Perthling suggested, you need to check the engine number that is stamped into the side of the block just above and to the right of the oil filter housing. The engine numbers for 2-liter F.I. models are 132C3.031 for the California emmission model and 132C3.040 for the other 49 states. If your engine has either of these numbers, it is the correct engine type for your vehicle. There is really no way of verifying that it is the actual original block based on serial numbers, only that it is the correct type.
John
'82 Fiat Spider Turbo
'56 Abarth 750 GT Corsa MM
'59 Lancia Appia GTE Zagato
'62 Lancia Flaminia 2.5 3C Convertible
'68 Lancia Fulvia Sport Zagato
'70 Moretti Sportiva S2
'12 Abarth 500
'59 MV Agusta 250 Raid
Pictures of my baby!
'82 Fiat Spider Turbo
'56 Abarth 750 GT Corsa MM
'59 Lancia Appia GTE Zagato
'62 Lancia Flaminia 2.5 3C Convertible
'68 Lancia Fulvia Sport Zagato
'70 Moretti Sportiva S2
'12 Abarth 500
'59 MV Agusta 250 Raid
Pictures of my baby!
Re: Lancia block in a fiat
Interesting...
I have original block pictures from mine. I trust Ray when he said it had never been touched (it was quite nasty) and the PO said it also nothing had really been replaced on the car. I'm the 2nd owner.
You can see after cleaning and blasting it says both Fiat and Lancia and what looks like a "188 AR 1". Ray said he had not seen Lancia stamped on any of the other engines before, but he's never rebuilt one that came off a Pininfarina. Possible that these are just the later engines, I thought it was kinda cool. Yes, he did stamp the VIN # and rebuild date on it!
I have original block pictures from mine. I trust Ray when he said it had never been touched (it was quite nasty) and the PO said it also nothing had really been replaced on the car. I'm the 2nd owner.
You can see after cleaning and blasting it says both Fiat and Lancia and what looks like a "188 AR 1". Ray said he had not seen Lancia stamped on any of the other engines before, but he's never rebuilt one that came off a Pininfarina. Possible that these are just the later engines, I thought it was kinda cool. Yes, he did stamp the VIN # and rebuild date on it!
Re: Lancia block in a fiat
mine is so greasy It's possible I just did not see the the fiat logo. now that I know where to look for the #, I'll check it and I'm betting it will be original.
- Tappy
- Posts: 721
- Joined: Wed Apr 02, 2008 8:22 pm
- Your car is a: 124 spider 2000 1979
- Location: Belgium ; Centre Of Europe
Re: Lancia block in a fiat
there should be a correct engine number stamped in just above the oil filter element
my Bet its 138 AR and according to my list they are the same blocks as used on the Ritmo (strada) ABARTH
here' r some interesting sites on lookup for your engine :
http://www.netikka.net/ville.vieri/tc/tclist.htm
and this :
http://clublancista.org/archivos/incl/l ... eabd806efa
my Bet its 138 AR and according to my list they are the same blocks as used on the Ritmo (strada) ABARTH
here' r some interesting sites on lookup for your engine :
http://www.netikka.net/ville.vieri/tc/tclist.htm
and this :
http://clublancista.org/archivos/incl/l ... eabd806efa
FineItalianAutomobile Technology
pls don't see what i write , read what i mean
pls don't see what i write , read what i mean
Re: Lancia block in a fiat
Sounds like the combo engine was used during the Pininfarina sales years 83-85. Does anyone have a block with Lancia on it earlier than that? The one thing I have found out about these cars is that there is always an exception to something they've done.