Just received my chrome bumpers

[80spider]

Does anyone have these brackets from Spiderpoint for mounting the older bumpers to the newer cars? If so, could you post a picture or a link? I have a set of the older bumpers and would like to use them on my '79. Check out the pics of the blue spider in this link - it's a really clean install and I like the look.

http://www.spider-point.de/1229.html

Jim

[Tappy]

i've done the convertion , but i welded brackets from the original shocks , if you want to read the info on spiderpoint you can use this link http://www.spider-point.com/ same dealer other ^place , and in englisch

[azygoustoyou]

Hey Tappy,
Can we get the stainless steel bumpers from this distributor? What is the price for the bumpers in US? Does anyone know what the shipping would cost. I really want these bumpers. Also, will I have to weld these bumpers to get them to fit?

[htchevyii]

There's some on Ebay, $990. +$30 shipping, OUCH! Spider Point sells on Ebay too.

http://cgi.ebay.com/ebaymotors/Fiat-124 ... ccessories

[Tappy]

Hey Tappy,
Can we get the stainless steel bumpers from this distributor? What is the price for the bumpers in US? Does anyone know what the shipping would cost. I really want these bumpers. Also, will I have to weld these bumpers to get them to fit?

they advertise :Available approx. February 2009!.
Bumbers set (1x front + 2x rear)
Order-No. 4029-1 Chrome Euro 399,-=+-504.814 USD
Order-No. 4029-0 Stainless Steel Euro 499,+-631.334 USD

you best mail them for shipping cost i guess somewhere between 100-150$ ? ive paid 90$ to get mine from the us


if you order these with them you dont nee to weld :

this what is included :
All bumper items mentioned here available approx. February 2009!
bumper mounts kit for the conversion to the early Fiat Spider models, Included are:
2 bumper mounts each for front and rear,
2 mounts for the square indicators underneath the front bumper (see bottom photo),
2 licenseplate lights, to go into the rear bumper edges,
various bolts, nuts and other mounting hardware

We recommend this kit for Spiders 75 and later (Europe and US)
Order-No: 4029-2 Euro 149,94 =+-190$

i bet they fit for the standard original bumpers 2 I especially like the included brackets because they will let you use the indicators up front , the bumper is also mounted a bit upwards in comparison to the stock -'74 , that way they block of square holes (see forum picture)


If you decide to import them be aware you probably need to pay customs on import on the value , might be a good idea to inform on thet Here in Belgium we have to pay 21% import costs on value +shipping of the item Donnu how it works if you go the other way arround

another remark the ones you see here are probably the same as listed on ebay , If i where you i would go for the stainless steel , as i ve read not so good comments on the chrome ones


i think considered all the costs you better lookout for a decent used set in the states , for the same amount you can these and get them rechromed , and they probably last longer as they are made from heavyer steel . The bracket set i would recomment if you cant weld or like to have it easy and an instand solution to the holes and indicators

[azygoustoyou]

I'll have to keep my eye on EBay if no one else has them. I want to put the long bumper on the back and the two short ones on the front. I think it looks better that way. Plus I like the idea that you can see the whole grill.
If anyone has a set they want to sell. Let me know.