Injector hose repair kit?

[nicktheviking]

Has anyone purchased the injector hose repair kit from IAP?

http://www.international-auto.com/index ... 57&noapp=1

Apparently it's generic, not vehicle-specific and I was wondering if it'll work.

[So Cal Mark]

it should work, but it's a bit expensive for what you get. Unless you want those original collors, just buy bullk hose and band clamps. You'll save some money

[nicktheviking]

Good point.

Is 3/8" close enough to 7.5mm or should I order the (more expensive) 7.5mm from IAP?

[So Cal Mark]

3/8 is too large, 5/16 is closer

[htchevyii]

I bought the kits, but returned them. I used their bulk hose and reused the old hats. They were a bit tricky to remove without bending, I ended up cutting the old hoses with an exacto knife.