Electric window won't go down

General chat about the car goes in here.
Post Reply
Jimb
Posts: 740
Joined: Mon May 05, 2008 1:03 am
Your car is a: 1985.5 Volumex

Electric window won't go down

Post by Jimb »

Hi guys,
my drivers door electric window will go up but not down. I have to roll it manually which is a very slow process. I'm hoping this problem is in the door and not the dash switch because the dash panel is a pain to get at.
Any ideas?
Jim
spider2081
Patron 2024
Patron 2024
Posts: 3015
Joined: Fri Jan 27, 2006 11:45 pm
Your car is a: 1981 Spider 2000
Location: Wallingford,CT

Re: Electric window won't go down

Post by spider2081 »

Most often when a window goes one direction and not the other the cause is the switch. The same 2 wires are used from the switch to the window motor. Usually the motor that turns one way will turn the other way. Most often switches fail in the up position You are fortunate to have the issue of the window not opening.
Jimb
Posts: 740
Joined: Mon May 05, 2008 1:03 am
Your car is a: 1985.5 Volumex

Re: Electric window won't go down

Post by Jimb »

Thanks, so does that mean I need a new switch or can the old one be fixed?

Jim
spider2081
Patron 2024
Patron 2024
Posts: 3015
Joined: Fri Jan 27, 2006 11:45 pm
Your car is a: 1981 Spider 2000
Location: Wallingford,CT

Re: Electric window won't go down

Post by spider2081 »

I have taken them apart, cleaned the contacts and reassembled them. I can't tell you how long they worked after the repair because i did it for others not myself. Some people install relays to extend the life o the switches.
tima01864
Patron 2021
Patron 2021
Posts: 702
Joined: Thu Jan 12, 2012 8:01 pm
Your car is a: 1983 FIAT Pininafarina Spider 2000
Location: Wilmington, MA

Re: Electric window won't go down

Post by tima01864 »

Look under the door Panel as well, There are two bullet connecters that do get oxidized. Clean them, May resolve your issue.
Jimb
Posts: 740
Joined: Mon May 05, 2008 1:03 am
Your car is a: 1985.5 Volumex

Re: Electric window won't go down

Post by Jimb »

Thanks guy, really helpful!

Cheers,
Jim
Post Reply