adjusting head lights
-
grasshopper
- Posts: 206
- Joined: Wed Aug 13, 2014 10:25 pm
- Your car is a: 1976 Fiat Spider
adjusting head lights
Hi all. Can someone please explain how to take round chrome rings off of the car to adjust the headlamps ? I cant figure out how to take those rings off,,,
-
DRUMMOND
- Patron 2018
- Posts: 443
- Joined: Thu Oct 20, 2011 11:11 pm
- Your car is a: Fiat Spyder 2000 1980 Pininfarina
Re: adjusting head lights
There is a screw at the bottom of the chrome ring
-
RRoller123
- Patron 2020
- Posts: 8179
- Joined: Sun Nov 13, 2011 2:04 pm
- Your car is a: 1980 FI SPIDER 2000
- Location: SAGAMORE BEACH, MA USA
Re: adjusting head lights
These screws are frequently stripped, mine are. Thankfully, the headlights are in position to pass inspection, so I haven't re-tapped to a larger size. But anyway, if they don't seem to adjust, this is likely the problem.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
-
ORFORD2004
- Posts: 1120
- Joined: Wed Mar 17, 2010 9:48 pm
- Your car is a: 1983 PININFARINA
- Location: Sherbrooke, Qc, Canada
Re: adjusting head lights
[quoteThese screws are frequently stripped][/quote]
But they screw in plastic. Probably not to hard to remove.
But they screw in plastic. Probably not to hard to remove.
-
RRoller123
- Patron 2020
- Posts: 8179
- Joined: Sun Nov 13, 2011 2:04 pm
- Your car is a: 1980 FI SPIDER 2000
- Location: SAGAMORE BEACH, MA USA
Re: adjusting head lights
Yes, probably easy to repair, I am just lazy since they point in the right direction. 
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
-
baltobernie
- Patron 2020
- Posts: 3466
- Joined: Sun Nov 25, 2007 6:00 pm
- Your car is a: 1973 Spider [sold]
- Location: Baltimore, MD
Re: adjusting head lights
Depending on model year, you may not need to remove the chrome bezel in order to adjust the headlamps. There are five identical #1 Phillips machine screws in each bucket. The three securing tabs hold the lamp in place. The other two adjust height and L/R. A shot of BP Blaster or Rost-Off on these screws and a sharp (properly-sized) screwdriver makes the job easier. YouTube videos and Internet posts abound with how to aim headlamps.