Idle adj. FI

tima01864 · Post by **tima01864** » Sat May 19, 2018 4:34 pm

Every procedure that I have read states, adjust idle at throttle stop to 800-900 rpm with idle speed adj screw all the way in. Then adjust idle speed screw to 800-9oo rpm. Not making sense if idle has been set with throttle stop. Do I start backing off the screw until idle speed changes?

tima01864 · Post by **tima01864** » Sun May 20, 2018 6:52 pm

Been playing with the idle and the electronic throttle. is having an effect, reading some old threads addressing this too. No air leaks apparent, checked the o-ring and sprayed some carb cleaner in the hole. Next check the timing and adjust those valves.

RRoller123 · Post by **RRoller123** » Mon May 21, 2018 11:27 am

Adjust idle with the cable, with the air screw fully closed. Then add another 100 rpm by opening the idle screw.

Idle adj. FI

Idle adj. FI

Re: Idle adj. FI

Re: Idle adj. FI