Stoles Race Shop - anyone used their valve covers?

architect · Post by **architect** » Thu Mar 16, 2017 7:27 pm

Does anyone have experience with Stoles Race Shop - valve covers?

I'm kinda digging it, and wonder who Stoles is?

Look on eBay:

https://www.ebay.com/itm/191679408472

70spider · Post by **70spider** » Thu Mar 16, 2017 7:38 pm

I have been eyeballing them for awhile. The bonus is they come with the rubber gasket, better sealing. I think they would be perfect on my 1438 motor.

architect · Post by **architect** » Thu Mar 16, 2017 8:56 pm

70spider wrote:I have been eyeballing them for awhile. The bonus is they come with the rubber gasket, better sealing. I think they would be perfect on my 1438 motor.

There a nice alternative - for repop's...

I'll wait for others to chime in before pulling the trigger

djape1977 · Post by **djape1977** » Fri Mar 17, 2017 6:11 am

nothing wrong with them. modern made reproduction. decent quality

xjware · Post by **xjware** » Fri Mar 17, 2017 8:15 am

http://www.stolesraceshop.com

or their Facebook page has lots more:
https://www.facebook.com/Stoles-race-sh ... e_internal

architect · Post by **architect** » Fri Mar 17, 2017 11:26 am

Just curious - where do you mount the throttle cable bracket (2 bolts)? The cast doesn't appear drill - threaded?

70spider · Post by **70spider** » Sat Mar 18, 2017 12:04 pm

On my 1438 I do not need throttle cable brackets, the throttle linkage bracket is mounted on the cam tower

.

architect · Post by **architect** » Sat Mar 18, 2017 1:01 pm

70spider wrote:On my 1438 I do not need throttle cable brackets, the throttle linkage bracket is mounted on the cam tower .

Ah I will go check out mine!

Unfortunately I travel for work a bunch and use my air time searching the web and not looking under the hood

architect · Post by **architect** » Mon Mar 20, 2017 8:36 am

1800 def has two holes as shown above - and confirmed with the seller.. their do not have the holes.

So next option would be - drill my own!

carl · Post by **carl** » Thu Mar 30, 2017 9:12 am

Yea, the bosses appear to be there and you will have to drill and tap them....don't drill all the way through, though.

Stoles Race Shop - anyone used their valve covers?

Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?

Re: Stoles Race Shop - anyone used their valve covers?