Oil / Vapor separator
-
Nanonevol
- Patron 2018
- Posts: 828
- Joined: Thu Nov 13, 2014 9:17 am
- Your car is a: 1977 Fiat 124 Spider
- Location: Medway, Massachusetts
Re: Oil / Vapor separator
We'll have to do something about that!
1977 Fiat Spider
1985 Jaguar XJ6
1967 Triumph Bonneville (hard-tail chopper)
1966 BSA Lightning
1985 Jaguar XJ6
1967 Triumph Bonneville (hard-tail chopper)
1966 BSA Lightning
-
architect
- Posts: 321
- Joined: Thu Jul 21, 2016 9:48 am
- Your car is a: 1978 Fiat Spider
- Location: Austin, Texas
Re: Oil / Vapor separator
Sorry no pics of the installation - I went to re install it a few nights ago and my phone died-
Re sitting the 3" bolt is a pain! If you get the "cup" like oil separator to sit into the gasket "groove" and turn the bolt my hand - you will feel the threads.
By far - the hardest part is getting the little "L" hose on! Grab a beer and buckle down!
If you lube the hoses - and I cut about 1/4" off one side to make it slightly shorter.. then they should slip on.
Don't forget your clamps too!
Re sitting the 3" bolt is a pain! If you get the "cup" like oil separator to sit into the gasket "groove" and turn the bolt my hand - you will feel the threads.
By far - the hardest part is getting the little "L" hose on! Grab a beer and buckle down!
If you lube the hoses - and I cut about 1/4" off one side to make it slightly shorter.. then they should slip on.
Don't forget your clamps too!
78 Fiat 124