hd heater pipe

So Cal Mark · Post by **So Cal Mark** » Sat Mar 12, 2016 12:17 am

We have a new manufacturer producing heater pipes and they've sent us the first batch with the new hd flange. The flange is 1/4" thick to prevent warpage or leaks at the water pump mounting flange.

vandor · Post by **vandor** » Sat Mar 12, 2016 1:31 pm

Nice!!

spidernut · Post by **spidernut** » Sun Mar 13, 2016 7:59 pm

A much-needed improvement!

weengra · Post by **weengra** » Wed Mar 16, 2016 10:34 am

I'm not complaining, but I am curious as to why no one has these made to include the tab that attaches to the exhaust manifold? I love the HD flange and SS, but I don't understand the omission of the other piece. "Splain it to me! Thanks. b-

ClarkTheShark · Post by **ClarkTheShark** » Wed Mar 16, 2016 4:11 pm

I ended up welding a stainless tab to mine - The HD flange isnt even necessary with the addition of the tab.

The tab is probably omitted because it interferes with certain header pipes, etc.

KevAndAndi · Post by **KevAndAndi** » Wed Mar 16, 2016 5:55 pm

I think Mark recently mentioned that he was going to start selling the support tab.

Mark?

RRoller123 · Post by **RRoller123** » Wed Mar 16, 2016 7:18 pm

An Adel clamp with the proper heat resistant cushion is needed, yes!

manoa matt · Post by **manoa matt** » Thu Mar 24, 2016 3:14 am

Are longer mounting studs required?

RRoller123 · Post by **RRoller123** » Thu Mar 24, 2016 9:03 am

Probably not, as there appears to be enough room for another nut and washer on mine, but they were somewhat FrankenFiated I must say...

So Cal Mark · Post by **So Cal Mark** » Thu Mar 24, 2016 9:32 am

the final steps in producing the strap are being done now. I should have them in about a week

aevansgatech · Post by **aevansgatech** » Thu Mar 24, 2016 2:40 pm

Mine arrives today!

Now that I've bypassed the heater core, this pipe will finish off this winter's cooling system overhaul

sshukes · Post by **sshukes** » Mon May 23, 2016 7:47 pm

Just curious but shouldn't there "tee" for a tube that goes to the carborator?

sshukes · Post by **sshukes** » Mon May 23, 2016 7:51 pm

I'm a dummy, that's for an older car I have a76

So Cal Mark · Post by **So Cal Mark** » Mon May 23, 2016 10:07 pm

I have both versions in stock, with the nipple and without. If you modernize the carb with an electric choke, you don't need the small water line anymore

RRoller123 · Post by **RRoller123** » Tue May 24, 2016 12:50 am

Hi Mark: Did that water pipe support-bracket Adel-type Clamp idea ever go into production?

hd heater pipe

hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe

Re: hd heater pipe