I have been unable to locate a mounting plate for my spider. I have a turtle back aircleaner mounted on two downdraft webers, the mounting plate fits inside the cleaner on top of the rubber mouldings that seat the cleaner to the carbs. Then the nuts screw down on top of the plate securing the lot to the carbs. There are two of these plates. Tough description I know...but those of you with the same set up will know. Any help appreciated.
Baz
Mounting plate - Weber
-
Baz
- Posts: 229
- Joined: Thu Mar 20, 2008 4:36 pm
- Your car is a: 1977 Fiat Spider
-
mdrburchette
- Posts: 5754
- Joined: Wed Jan 25, 2006 5:49 am
- Your car is a: 1972 Fiat 124 Sport
- Location: Winston-Salem, NC
Re: Mounting plate - Weber
I'm missing one from my setup up. I know it's not right, but I use wide washers so my nuts don't dig into the rubber.
1972 124 Spider (Don)
1971 124 Spider (Juan)
1986 Bertone X19 (Blue)
1978 124 Spider Lemons racer
1974 X19 SCCA racer (Paul)
2012 500 Prima Edizione #19 (Mini Rossa)
Ever changing count of parts cars....It's a disease!
1971 124 Spider (Juan)
1986 Bertone X19 (Blue)
1978 124 Spider Lemons racer
1974 X19 SCCA racer (Paul)
2012 500 Prima Edizione #19 (Mini Rossa)
Ever changing count of parts cars....It's a disease!
-
rlux4
- Patron 2022
- Posts: 4211
- Joined: Thu Jan 10, 2008 8:32 pm
- Your car is a: 1982 2000 Spider
- Location: Granite Falls, Wa
Re: Mounting plate - Weber
mmpffff.
-
mdrburchette
- Posts: 5754
- Joined: Wed Jan 25, 2006 5:49 am
- Your car is a: 1972 Fiat 124 Sport
- Location: Winston-Salem, NC
Re: Mounting plate - Weber
I knew it would be you that would read more into it. 
1972 124 Spider (Don)
1971 124 Spider (Juan)
1986 Bertone X19 (Blue)
1978 124 Spider Lemons racer
1974 X19 SCCA racer (Paul)
2012 500 Prima Edizione #19 (Mini Rossa)
Ever changing count of parts cars....It's a disease!
1971 124 Spider (Juan)
1986 Bertone X19 (Blue)
1978 124 Spider Lemons racer
1974 X19 SCCA racer (Paul)
2012 500 Prima Edizione #19 (Mini Rossa)
Ever changing count of parts cars....It's a disease!
-
rlux4
- Patron 2022
- Posts: 4211
- Joined: Thu Jan 10, 2008 8:32 pm
- Your car is a: 1982 2000 Spider
- Location: Granite Falls, Wa
Re: Mounting plate - Weber
What?? I didn't say anything.
OK, I promise, no more. (I know, enough is enough)
Ron
OK, I promise, no more. (I know, enough is enough)
Ron
-
mbouse
Re: Mounting plate - Weber
in this case ENOUGH = quite humorous. 
i love this forum, it gives me a chance to vent, a chance to show what i know and don't know, a chance to share crackle paint projects, a chance to get some advice (some of it good)... but most importantly... it entertains me thru every dull, boring, mundane day of my employed life.
i love this forum, it gives me a chance to vent, a chance to show what i know and don't know, a chance to share crackle paint projects, a chance to get some advice (some of it good)... but most importantly... it entertains me thru every dull, boring, mundane day of my employed life.