Driveline shakes, yoke alignment bushing race....

[grrrdot]

Hi,
So I am trying to track down a drive-line vibration and noise. I pulled the driveshaft end of yoke and found that the yoke alignment bushing and race are severely worn in one place, its a noticeable trough.


I pulled the bushing race out and its 32mm x 28mm x 13mm. Does not look like a serviceable part from Fiat.

If this part is worn does it mean the yoke is bent somehow?
Or can I track down a race or bushing and replace this?

-G

[wizard124]

Try vxb.com for the bearing.

[grrrdot]

Turns out the part is available!
Fiat 4593212
-G

[vandor]

Used yokes are cheap. We may even have new ones.

[grrrdot]

Yeah I was looking at that route but I just had the whole drive-line balanced with this yoke.
I ended up spending ~$14 for the race, not amazing but will get me back on the road.

-G