Can anyone tell me for sure if this manifold will work with a 1979 2 liter Spider head?
http://www.ebay.com.au/itm/FIAT-124-125 ... TQ:AU:1123
It will bolt up but do the parts that cover water holes work? I am mostly concerned about what appears to be a recessed area that looks to just open up downward between #1 and #2 runners? Has anyone used on of these successfully on a 2 liter Spider?
Compatible with 2 liter Spider?
-
zachmac
- Posts: 1278
- Joined: Sun Aug 24, 2008 9:20 am
- Your car is a: 1978 Spider [1979 2 ltr engine]
- Location: Aiken, SC
Compatible with 2 liter Spider?
Jeff Klein, Aiken, SC
1980 FI Spider, Veridian with Tan (sold about a year ago), in the market for another project
1989 Spider, sold
2008 Mercedes SL65
2008 S600 Mercedes V12
1980 FI Spider, Veridian with Tan (sold about a year ago), in the market for another project
1989 Spider, sold
2008 Mercedes SL65
2008 S600 Mercedes V12
-
bradartigue
- Posts: 2183
- Joined: Thu Sep 20, 2007 2:35 pm
- Your car is a: 1970 Sport Spider
- Location: Atlanta, GA
Re: Compatible with 2 liter Spider?
Find a good 1800 intake manifold...this not only has the recessed area but some cross-port plumbing (it may simply be a water jacket) between two of the runners. I'm also not sure the water inlet is on the right side of the manifold, wouldn't a 124 head have it on the back, vs. the front runner?
1970 124 Spider
http://www.artigue.com/fiat
http://www.artigue.com/fiat
-
vandor
- Posts: 3996
- Joined: Sat May 23, 2009 1:23 pm
- Your car is a: 1971 124 Spider
- Location: Texas, USA
Re: Compatible with 2 liter Spider?
It does not have the piece that goes over the rear water outlet on the 2000 head.
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town