]Hello
I have a Spider 2000 with a Abarth 130TC engine.
The normal "end cove" for the camshaft, is too little (this is on the inlet side).
Do someone know if there is different sizes on these covers?
Camshaft cover
-
131
- Posts: 672
- Joined: Sun Nov 14, 2010 1:13 am
- Your car is a: 1982 131 Superbrava warmed 2.0 litre.
- Location: Tasmania, Australia
Re: Camshaft cover
The 130tc had the ignition distributor on the end of the inlet cam, there probably isn't a cover to fit it if the distributor has been removed. You'll either have to make one or replace the cambox.Spidernord wrote:]Hello
I have a Spider 2000 with a Abarth 130TC engine.
The normal "end cove" for the camshaft, is too little (this is on the inlet side).
Do someone know if there is different sizes on these covers?
Mick.
'82 2litre 131, rally cams, IDFs & headers.
'82 2litre 131, rally cams, IDFs & headers.
-
djape1977
- Posts: 985
- Joined: Sat Apr 21, 2012 6:08 pm
- Your car is a: 1970 fiat 124bc
- Location: Belgrade, Serbia, eastern Europe
Re: Camshaft cover
too little in what way?
pic would help...
pic would help...