Ride Height

sjmst · Post by **sjmst** » Mon Jul 28, 2008 9:49 am

Still trying to sort out my spring issues. Can anyone tell me the correct REAR ride height for later model Spiders? I would think measuring from the center of the center cap to the bottom of the wheel opening would be the right way to do it. If anyone knows off hand or has their car handy to measure, it would be much appreciated.
Thanks
Sam

So Cal Mark · Post by **So Cal Mark** » Mon Jul 28, 2008 10:16 am

ride height is measured from the ground to the top of the fenderwell

sjmst · Post by **sjmst** » Mon Jul 28, 2008 10:25 am

OK, thanks, Mark!

If anyone has that spec, please let me know.
Sam

ga.spyder · Post by **ga.spyder** » Mon Jul 28, 2008 12:02 pm

Hey Sam ,I measured mine floor to fender lip thru the center cap at 24 11/16''.I am running 15'' wheels and low profile tires ,but I dont think that should matter as they are same height as stock. Your ''simple'' spring swap reminds me of my ''1 hour'' swaybar bushing change,which still isnt finished!

good luck ,Craig

sjmst · Post by **sjmst** » Mon Jul 28, 2008 12:08 pm

ga.spyder wrote:Hey Sam ,I measured mine floor to fender lip thru the center cap at 24 11/16''.I am running 15'' wheels and low profile tires ,but I dont think that should matter as they are same height as stock. Your ''simple'' spring swap reminds me of my ''1 hour'' swaybar bushing change,which still isnt finished!
good luck ,Craig

Thanks, Craig. I have the 14 inch wheels like in the pic at the top of the forum. I think I can figure it out from what you gave me.

So Cal Mark · Post by **So Cal Mark** » Mon Jul 28, 2008 12:17 pm

the only spec in the factory manual is the overall height of the car

Ride Height

Ride Height

Re: Ride Height

Re: Ride Height

Re: Ride Height

Re: Ride Height

Re: Ride Height