weber 32 adfa

philoutch · Post by **philoutch** » Wed Oct 07, 2015 3:25 am

Dear All,

I am looking for diaphragm inside weber 32 adfa capsule 31800.027, don't find it !!!! any idea where to get it ?

http://www.bccp.nl/techdocs/Weber32ADFA.pdf - (N. 16)

THX a lot

kilrwail · Post by **kilrwail** » Wed Oct 07, 2015 7:37 am

I suspect you're looking for the accelerator pump diaphragm part number 69 on the schematic - #47407.118.
You can buy a Weber carb rebuild kit from NAPA which includes the diaphragm.

philoutch · Post by **philoutch** » Wed Oct 07, 2015 8:03 am

Thanks for the answer.

Well, the pump diaphragm part number 69 was included in my repair kit but if I am not mistaken inside part number 16 there is also a diaphragm which I can't find at the moment.

i'll post a picture later today to avoid confusion

philoutch · Post by **philoutch** » Wed Oct 07, 2015 3:15 pm

Here is what I am looking for :

philoutch · Post by **philoutch** » Thu Oct 08, 2015 11:03 am

got an answer from Weber, this part is not available anymore, great !!!!!

This is the fast idle capsule apparently, what will be the consequence if the diaphragm is defective ? not sure ...

lanciahf · Post by **lanciahf** » Thu Oct 08, 2015 4:06 pm

If you are not using the fast idle capsule for emissions , you can remove it and plug the vacuum hole with some sort of sealant or jb weld.

bradartigue · Post by **bradartigue** » Thu Oct 08, 2015 6:23 pm

I don't know many cars where that system works correctly any more; I have to agree, just plug the thing and remove the fast idle device.

weber 32 adfa

weber 32 adfa

Re: weber 32 adfa

Re: weber 32 adfa

Re: weber 32 adfa

Re: weber 32 adfa

Re: weber 32 adfa

Re: weber 32 adfa