Doing my research and coming up short on this one...is swapping the intake cam cover for one with the dimple in the center a requirement to fit an '80 FI intake/plenum/TB on a 79 carb'ed 2.0L?
TIA
bluespider262
FI swap & cam cover
-
bluespider262
- Posts: 160
- Joined: Mon May 25, 2015 11:14 am
- Your car is a: 1979 Spider
-
bradartigue
- Posts: 2183
- Joined: Thu Sep 20, 2007 2:35 pm
- Your car is a: 1970 Sport Spider
- Location: Atlanta, GA
Re: FI swap & cam cover
I believe they both fit, but if you use the one without the dimple the black hose may rub. If it rubs it may move or wear thin in that spot.
1970 124 Spider
http://www.artigue.com/fiat
http://www.artigue.com/fiat
-
vandor
- Posts: 3996
- Joined: Sat May 23, 2009 1:23 pm
- Your car is a: 1971 124 Spider
- Location: Texas, USA
Re: FI swap & cam cover
I've seen FI conversion that did not use the dimpled cam cover.
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
-
bluespider262
- Posts: 160
- Joined: Mon May 25, 2015 11:14 am
- Your car is a: 1979 Spider
Re: FI swap & cam cover
Thanks guys!