Deck height

PMcG · Post by **PMcG** » Fri Jun 05, 2015 12:09 pm

Would anyone know the stock deck height for a 1.8l engine?. Trying to order some Ross pistons for my build. Machine shop says they can't measure it accurately?

RoyBatty · Post by **RoyBatty** » Fri Jun 05, 2015 5:34 pm

I'm looking in all the various references I have and I don't see that dimension called out anywhere.
I have a couple disassembled blocks in my garage. I could get you dimensions from them.

vandor · Post by **vandor** » Fri Jun 05, 2015 10:28 pm

I have if somewhere, but I won't be near those books for a few days. If you machine can't take ONE minute to measure it likely you should not use them. Same if they don't know how to....

PMcG · Post by **PMcG** » Fri Jun 05, 2015 11:11 pm

Agreed on the machine shop, Vandor. The engine is already apart. Does it have to have the crank re-installed to get an accurate centre line to measure the height?. Meanwhile, I don't mind waiting if you can find the number from one of your reference books. None of mine had the deck height.

vandor · Post by **vandor** » Sun Jun 07, 2015 8:27 am

No, crank does not have to be installed.
Send me an email, to remind me once I'm near those books in a few days.

Deck height

Deck height

Re: Deck height

Re: Deck height

Re: Deck height

Re: Deck height