Rear bumper attachement
-
mglisson
- Posts: 12
- Joined: Sun Mar 24, 2013 4:48 pm
- Your car is a: 1979 2000 Pininfarina
- Location: Baton Rouge, LA
Rear bumper attachement
I have two questions related to attaching a rear bumper. 1. What size and how long are bolts that attach to the bumper shocks to frame and do you really have to remove the gas tank to install rear bumpers?
-
ClarkTheShark
Re: Rear bumper attachement
I dont know what size they are. M12x1mm I THINK.
yes. you have to remove the gas tank. it isn't too bad of a job though. I would go ahead and drive your spider until its nearly empty of fuel. then drain the remainder.
yes. you have to remove the gas tank. it isn't too bad of a job though. I would go ahead and drive your spider until its nearly empty of fuel. then drain the remainder.
-
vandor
- Posts: 3996
- Joined: Sat May 23, 2009 1:23 pm
- Your car is a: 1971 124 Spider
- Location: Texas, USA
Re: Rear bumper attachement
Those bolts are 14mm diameter.
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
-
81SPIDERMATT
- Posts: 1239
- Joined: Mon Oct 11, 2010 5:10 pm
- Your car is a: 1981 spider 2000
- Location: FORT COLLINS, CO
Re: Rear bumper attachement
and I I did it by removing the tank bolts and kinda moving it "enough" to get to what I needed ...