Automatic Transmission Vacuum Line

spidernut · Post by **spidernut** » Sat Jan 04, 2014 7:40 pm

I ran into a snag putting my car back together after the engine rebuild. I have only one thing that that has me baffled. There is a vacuum line from the automatic transmission module to the intake/carb. I cannot find where the vacuum line connects from the metal line to the intake/carb. The Fiat shop manual doesn't show it and apparently the label I made must have fallen off. None of my pictures show it either and my old brain can't recall.

Anyone know where it connects? I can't find an open vacuum connection anywhere.

fiat218 · Post by **fiat218** » Sat Jan 04, 2014 7:43 pm

what end are you looking for ? tranny or carb

fiat218 · Post by **fiat218** » Sat Jan 04, 2014 7:45 pm

never mind, i read it wrong, u need the end into the carb. or intake

spidernut · Post by **spidernut** » Sat Jan 04, 2014 9:50 pm

I found it. I labeled it but it got tucked underneath near the thermal control valves.

RoyBatty · Post by **RoyBatty** » Sat Jan 04, 2014 10:14 pm

Is it straight manifold vacuum for the vacumm modulator?

So Cal Mark · Post by **So Cal Mark** » Sat Jan 04, 2014 11:53 pm

it has to be manifold vacuum

Automatic Transmission Vacuum Line

Automatic Transmission Vacuum Line

Re: Automatic Transmission Vacuum Line

Re: Automatic Transmission Vacuum Line

Re: Automatic Transmission Vacuum Line

Re: Automatic Transmission Vacuum Line

Re: Automatic Transmission Vacuum Line