Gangsta Lean

davery · Post by **davery** » Mon Sep 23, 2013 4:31 pm

So I have that normal lean in the drivers seat. I assume the internal metal bracing has either bent or broken. I want to take off the leather/vinyl cover off the back and have a look. What is the best way of doing this? I have the back off, but I am not sure how to peel the cover off. Thanks.

garion · Post by **garion** » Mon Sep 23, 2013 6:04 pm

Damn. I just did that same search not an hour ago! Here's what I dug up:

http://www.fiatspider.com/f08/viewtopic ... 8&p=161932

and referenced in that post:

http://www.fiatspider.com/f08/viewtopic ... 38&p=58137

davery · Post by **davery** » Mon Sep 23, 2013 6:24 pm

garion wrote:Damn. I just did that same search not an hour ago! Here's what I dug up:

http://www.fiatspider.com/f08/viewtopic ... 8&p=161932

and referenced in that post:

http://www.fiatspider.com/f08/viewtopic ... 38&p=58137

That is some good info. Now if I could just get the cover off the seat. I am afraid I am going to pull it apart if I force it.

Kingme2 · Post by **Kingme2** » Sat Sep 28, 2013 4:54 pm

If you pull off the seat covers, pick up a kit for heated seats ($100 ebay)... Best time.

Gangsta Lean

Gangsta Lean

Re: Gangsta Lean

Re: Gangsta Lean

Re: Gangsta Lean