Pistons

fiat218 · Post by **fiat218** » Sat Jul 13, 2013 8:53 am

http://www.ebay.com/itm/JDM-HONDA-CIVIC ... 0315966971

Are 81 mm ,pistons are pistons,does it matter what they say as to what make of car they are selling it for? Or what

Ramzi · Post by **Ramzi** » Sat Jul 13, 2013 9:22 am

Not if you know what you are doing.... I have Non Fiat 81mm pistons in a 1438 which is bored and stroked to 1650

R

fiat218 · Post by **fiat218** » Sat Jul 13, 2013 10:16 am

What is there to know, I mean what would I have to get

Tobi · Post by **Tobi** » Sat Jul 13, 2013 10:33 am

fiat218 wrote:What is there to know, I mean what would I have to get

A 16V head!

fiat218 · Post by **fiat218** » Sat Jul 13, 2013 10:42 am

Tobi wrote:
fiat218 wrote:What is there to know, I mean what would I have to get
A 16V head!

Lol ok.well gee

Ramzi · Post by **Ramzi** » Sat Jul 13, 2013 11:09 am

fiat218 wrote:What is there to know...

Probably the most important thing is 'what are you trying to accomplish'... Some very basic technical info might be pin diameters, dome / crown height, and skirt length. It is certainly much simpler to have a custom piston made than to find a piston which 'may fit'

Ramzi

fiat218 · Post by **fiat218** » Sat Jul 13, 2013 11:13 am

Ramzi wrote:
fiat218 wrote:What is there to know...
Probably the most important thing is 'what are you trying to accomplish'... Some very basic technical info might be pin diameters, dome / crown height, and skirt length. It is certainly much simpler to have a custom piston made than to find a piston which 'may fit'

Ramzi

I'm going as far out as a 1608 can be built
Or maybe I should take the 2.0 out of the 80and use that to the limit,and put the 1608 I have in the 80

Ramzi · Post by **Ramzi** » Sat Jul 13, 2013 11:49 am

[/quote]I'm going as far out as a 1608 can be built....[/quote]

Ahhh yes. Well you know what they say.... 'linear performance is directly proportional to rectangular dollars"

Sounds like a fun build....keep us posted

Ramzi

sptcoupe · Post by **sptcoupe** » Sat Jul 13, 2013 3:57 pm

If you are looking to maximize power, then definitely go with the 2.0L That engine is 25% larger than an 1608, and the same mods on it that you plan for the 1608 will produce far more power. Size does matter.

fiat218 · Post by **fiat218** » Sat Jul 13, 2013 9:16 pm

Ok thanks, I may take the 2 liter out of my 80

Pistons

Pistons

Re: Pistons

Re: Pistons

Re: Pistons

Re: Pistons

Re: Pistons

Re: Pistons

Re: Pistons

Re: Pistons

Re: Pistons