Blinker kit from mark

fiat218 · Post by **fiat218** » Tue Apr 23, 2013 8:16 am

Where do most people mount this lights, I'm bumper less
Thanks

81SPIDERMATT · Post by **81SPIDERMATT** » Tue Apr 23, 2013 9:26 am

i used the oval holes.... they need to be "wallered out" a bit

fiat218 · Post by **fiat218** » Tue Apr 23, 2013 9:28 am

81SPIDERMATT wrote:i used the oval holes.... they need to be "wallered out" a bit

Ok great, so they need to be a bit bigger

81SPIDERMATT · Post by **81SPIDERMATT** » Tue Apr 23, 2013 11:52 am

you just have to round them out a bit...the holes as is are wide enough just not tall enough if you know what i mean.. do a little at a time and then check fitment .... i would wait until you have the kit in hand..... dont just round them out

fiat218 · Post by **fiat218** » Tue Apr 23, 2013 11:56 am

81SPIDERMATT wrote:you just have to round them out a bit...the holes as is are wide enough just not tall enough if you know what i mean.. do a little at a time and then check fitment .... i would wait until you have the kit in hand..... dont just round them out

Thanks, i have them. I just have not looked at them yet. I seems to loose stuff in my garage.
What did you use to cut it out

81SPIDERMATT · Post by **81SPIDERMATT** » Tue Apr 23, 2013 12:04 pm

i used some type of grinding thing that fit in my drill... looked like a small barrel .... the guy at ace said it would work... not a whole lot needs to be removed.... did not trust my abilities with my big grinder tryiing to finesse a cut in that small space.... worried that i would cut too much or catch and run a big scratch.... and the sawzall seem to be overkill

fiat218 · Post by **fiat218** » Tue Apr 23, 2013 7:44 pm

i seen that not much needs to be removed
how did u fasten that light? what did you use on the back side?

So Cal Mark · Post by **So Cal Mark** » Tue Apr 23, 2013 9:58 pm

the light has a cup that mounts from the back side to secure the light

fiat218 · Post by **fiat218** » Tue Apr 23, 2013 10:08 pm

So Cal Mark wrote:the light has a cup that mounts from the back side to secure the light

Ok I was thinking that's how it would go, but was not positive, thanks
And I got to buy my own nuts? Lol

fiat218 · Post by **fiat218** » Tue Apr 23, 2013 10:29 pm

Hooked up. But not in place yet

fiat218 · Post by **fiat218** » Tue Apr 23, 2013 10:58 pm

SLOSpider · Post by **SLOSpider** » Wed Apr 24, 2013 12:07 am

Don't JACK UP that light install

So Cal Mark · Post by **So Cal Mark** » Wed Apr 24, 2013 12:10 am

with a Dremel or similar grinder, remove a slight amount of metal from the top and bottom of each bumper shock hole. The rubber grommet will fill the gaps around the edges of the lights.

toplessexpat · Post by **toplessexpat** » Wed Apr 24, 2013 12:28 am

While there's nothing wrong with the blinker light kit ...

... I elected to fit some custom truck headlamps with integrated LED blinkers in the the bottom 10mm or so. There's also a row of LEDs for the park lights.

Ping me if you'd like pictures - on the Texas Hill Country run a couple of weeks back, people saw mine and weren't overly critical

Andy

SLOSpider · Post by **SLOSpider** » Wed Apr 24, 2013 2:21 am

Post up some pics topless

Blinker kit from mark

Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark

Re: Blinker kit from mark