EZ Cool

rjkoop · Post by **rjkoop** » Sat Apr 20, 2013 8:05 am

Looks like EZ Cool is the way to go for lining the floors. I'm in Canada so I was thinking about using these guys.

http://ezcool.ca/

Other option is that I order off of ebay...

http://www.ebay.ca/itm/4-X-10-EZ-Cool-A ... 032wt_1298

And ship to Ogdensburg to avoid any duty costs. Or are there other options?

Exit98 · Post by **Exit98** » Sat Apr 20, 2013 9:42 am

This is the stuff I used, great price, easy to apply, and no more heat in the cabin.

http://r.ebay.com/pnhg6E

Pictures of it installed here:

http://www.fiatspider.com/f08/viewtopic ... 30&t=18105

4uall · Post by **4uall** » Sat Apr 20, 2013 10:26 am

ez cool is awesome and you can get it somewhat locally (905) area code

THE TOTAL PRICE & including shipping FOR MY EZ COOL IS $56.75 The weight of one roll of EZCool is 2lbs. The size is 48''x6''x6' and no driving to the US

http://forum.fiatspider.com/f08/viewtop ... l&start=60 page 5

narfire · Post by **narfire** » Sat Apr 20, 2013 12:00 pm

A couple of years ago for the winter projets, I had obtained some heat/sound insulation from a boat manufacturing place that went out of business. This is the stuff that lined the inside of the engine box in the middle of the ski/wake board boats. Silver heat reflection one side and dense foam on the other.
It has worked for me to date

bobbo52 · Post by **bobbo52** » Sat Apr 20, 2013 6:11 pm

I used it for my Spider, one roll covered almost the whole car, but about half of the back seat area. Great stuff and very easy to use.

RRoller123 · Post by **RRoller123** » Sat Apr 20, 2013 6:57 pm

I just put it in my Spider this Winter and it is excellent. Very thin and light and really cuts heat and noise. Easy to install. I doubled it up over the CatCon.

srwilson · Post by **srwilson** » Mon Apr 22, 2013 9:15 am

Just finished my EZ Cool install this weekend!!! Someone said easy but tedious... I would agree. Maybe it was Pete that said that awhile back. But anyway, between the beer and the adhesive fumes it's a wonder I was able to finish at all..., but I plowed through.

RRoller123 · Post by **RRoller123** » Mon Apr 22, 2013 10:11 am

That is a really good job. Yes very tedious. I didn't deal with it under the bundle of wires/gas lines on the left wall like you did. Bravo.

Pete

rjkoop · Post by **rjkoop** » Mon Apr 22, 2013 10:46 am

srwilson wrote:Just finished my EZ Cool install this weekend!!! Someone said easy but tedious... I would agree. Maybe it was Pete that said that awhile back. But anyway, between the beer and the adhesive fumes it's a wonder I was able to finish at all..., but I plowed through.

Wow... Great job. Was 1 4'x10' roll enough? Also should I do the back area as well or not worth it for road noise?

srwilson · Post by **srwilson** » Mon Apr 22, 2013 1:09 pm

Yes, I used 1 4x10 roll and had a little left, maybe 3x2 if that. Not enough to do under the rear seat. So if you're planning to do that you may need more. I figure the seat pretty much takes care of that area. I guess Fiat thought so too since there was no jute under there to begin with.

Thanks for the compliment!

RRoller123 · Post by **RRoller123** » Mon Apr 22, 2013 2:19 pm

Maybe double it up over the CatCon bump!! It is nice and cool there now on mine.

Pete

srwilson · Post by **srwilson** » Mon Apr 22, 2013 2:44 pm

RRoller123 wrote:Maybe double it up over the CatCon bump!! It is nice and cool there now on mine.

Pete

That's a good Idea. There should be enough left to that for sure.

EZ Cool

EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool

Re: EZ Cool