hoist hook up
hoist hook up
I've got a 72 124 spider and looking to pull the engine. What or where is the best chain hook up. Or is there a strap technique that is available. I;m planning to pull with the tranny attached. Any tricks please pass them along ! THANKS
- aj81spider
- Patron 2020
- Posts: 1526
- Joined: Fri Mar 11, 2011 9:04 am
- Your car is a: 1974 Fiat 124 Spider
- Location: Chelmsford, MA
Re: hoist hook up
I pulled mine with the tranny attached. In the front I grabbed the engine on the tab that is there for lifting the engine (if it's missing you can use one of the head bolts). As the picture shows in the back I wrapped the chain around the exhaust manifold. A leveler makes it a lot easier getting the engine out. The transmission also almost didn't get past the steering linkage. You might want to take that off before pulling the engine, otherwise you'll do a lot of fiddling.
A.J.
1974 Fiat 124 Spider
2006 Corvette
1981 Spider 2000 (sold 2013 - never should have sold that car)
1974 Fiat 124 Spider
2006 Corvette
1981 Spider 2000 (sold 2013 - never should have sold that car)
- 4uall
- Posts: 4145
- Joined: Mon Sep 26, 2011 12:09 pm
- Your car is a: 1980 Fiat Pininfarina Spider 2000 F.I.
- Location: Ottawa, Ontario, Canada
Re: hoist hook up
Jay
Fiona
1980 FI 2000 Spider
ITZEBTZE
https://goo.gl/photos/eNKaX7hrXhBu9fmp6
FINN (FN-2187)
2014 Jeep Wrangler Sport
MYTHERPY
Fiona
1980 FI 2000 Spider
ITZEBTZE
https://goo.gl/photos/eNKaX7hrXhBu9fmp6
FINN (FN-2187)
2014 Jeep Wrangler Sport
MYTHERPY