Hi,
Can anyne tell the height of the standard front and rear springs for a 1981 Spider ? ( in millimeters or inches )
Thanks in Advance
Height of Springs
-
adrians
- Posts: 851
- Joined: Tue Jan 15, 2008 6:07 am
- Your car is a: 1981 Spider Turbo - missing the turbo
- Location: Sydney - Australia
Height of Springs
THE FLEET
2014 Abarth "SS"
1981 Spider 2000 (Legend Industries Turbo - minus the Turbo)
1978 X1/9 1.3 Dual IDF 40's, Coupe Cam, Allison Header/Exhaust
1971 128 Sedan 1100cc, Coupe Cam/Headers
Motokhana Special 127 rear engined Rail 903cc
2014 Abarth "SS"
1981 Spider 2000 (Legend Industries Turbo - minus the Turbo)
1978 X1/9 1.3 Dual IDF 40's, Coupe Cam, Allison Header/Exhaust
1971 128 Sedan 1100cc, Coupe Cam/Headers
Motokhana Special 127 rear engined Rail 903cc
-
perthling
- Posts: 349
- Joined: Wed Jan 09, 2008 11:04 pm
- Your car is a: 1974 124 Spider
- Location: Western Australia
Re: Height of Springs
Adrian
FYI the spring height changed post-74 to raise the height of the Spider to meet the US regulations. If you end up removing the bumpers you might find your car looks like it's on stilts. Fortunately there are plenty of aftermarket springs available (sold in Aus for the 124 Coupe).
Regards
FYI the spring height changed post-74 to raise the height of the Spider to meet the US regulations. If you end up removing the bumpers you might find your car looks like it's on stilts. Fortunately there are plenty of aftermarket springs available (sold in Aus for the 124 Coupe).
Regards
_______________________
Perthling
1974 Fiat 124 Spider (blade bumper 1756cc)
1974 Fiat 124 CC (same family since new)
1975 Fiat 124 CC (project)
1969 Fiat 124AC (project)
1997 Coupe Fiat 20VT (daily driver)
http://www.fiatlancia.org.au
Perthling
1974 Fiat 124 Spider (blade bumper 1756cc)
1974 Fiat 124 CC (same family since new)
1975 Fiat 124 CC (project)
1969 Fiat 124AC (project)
1997 Coupe Fiat 20VT (daily driver)
http://www.fiatlancia.org.au