tool kit

akavinn1 · Post by **akavinn1** » Sat Sep 15, 2012 10:51 pm

Yea i was looking for a screw driver to complet my kit

124cso · Post by **124cso** » Tue Sep 18, 2012 10:33 pm

fiat218 wrote:I think it a punch, but I really don't know, maybe a tool to Aline holes

Could be used for either use I suppose, but primarily it is the handle for the box/plug spanner.

This same tool kit was supplied with virtually every Fiat leaving the factory 1960's - late 70s. Somewhere in late 70s the contents were put into a pouch in place of the plastic box, for Spiders anyway.

fiat218 · Post by **fiat218** » Tue Sep 18, 2012 10:37 pm

124cso wrote:
fiat218 wrote:I think it a punch, but I really don't know, maybe a tool to Aline holes

Could be used for either use I suppose, but primarily it is the handle for the box/plug spanner.

This same tool kit was supplied with virtually every Fiat leaving the factory 1960's - late 70s. Somewhere in late 70s the contents were put into a pouch in place of the plastic box, for Spiders anyway.

I seen that it used for the plug socket, I have a pouch too and box

TX82FIAT · Post by **TX82FIAT** » Mon Oct 15, 2012 4:25 pm

Anyone interested in selling just the punch tool? If not interested in selling can you give me the length and approximate diameter of the tool. My guess is that I could find almost the identical thing at a flee market about 25 miles from the house. These folks have tons of old tools on the tables and it would not suprise me to stuble across one or something that does the same thing.

akavinn1 · Post by **akavinn1** » Mon Oct 15, 2012 4:55 pm

I bought the punch from Chris at fiat plus for something like $1.50 unlike some of the crazy prices guys are asking on here

TX82FIAT · Post by **TX82FIAT** » Mon Oct 15, 2012 9:09 pm

Great prices, I may pick up a jack hold down strap. No punch tools.

fiat218 · Post by **fiat218** » Mon Oct 15, 2012 9:31 pm

I can sell the whole kit for 60

bonsaiwino · Post by **bonsaiwino** » Sat Nov 02, 2013 9:14 pm

I'm also missing the screwdriver. Does anyone know if there's anything that resembles it out there? Thanks!

fredguaz · Post by **fredguaz** » Sat Nov 02, 2013 11:10 pm

I already obtained a t wrench from another forum member.
(how do you delete a post on this forum?)

akens124 · Post by **akens124** » Mon Nov 04, 2013 9:50 am

The 4-in-one screwdriver is similar, slightly bigger, with 2 phillip's bits and two flat bits. These are excellent tools wih hardened bits. It is one of my favorite tools for eveything. I keep one ii the driver's side pouch, instead of the tool pouch.

Jim Akens

Dawgme85 · Post by **Dawgme85** » Mon Nov 04, 2013 9:38 pm

Edit - Oops. I didn't see Page 2. My bad...

georgeramos wrote:What is the long thin item that goes in the compartment with the wrenches and does anyone have an extra to sell or trade?

That's for inserting into the spark plug socket, to allow you to loosen/tighten the plugs.

bonsaiwino · Post by **bonsaiwino** » Sat Nov 09, 2013 9:12 am

The only tool missing from my tool kit is the large double-ended wrench....not sure what size? Anyone have one you can part with? Thanks, Don

tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit

Re: tool kit