Just put in a new cooling fan sensor on rad. It doesn't come on until around 220 which seems too hot to me. By then engine is getting hot and it doesn't bring temp down in stop and go driving, but will if I get out on open road and get some air flow to rad. What temp should the sensor turn on fan? It's a new aftermarket sensor (read cheap). I'm going to replace it with a new, different sensor. I've also put a manual switch for fan in cabin which works great as a backup but I obviously want the fan to cycle on it's own at proper temp.
Also my car has air conditioning which I don't plan to use, should I pull AC core or rad (whatever it's called) to improve air flow? One other thing, cabin is warm with heater off, is this unusual and what can be done?
Thanks
Dan
Cooling fan sensor-what temp?
- 4uall
- Posts: 4145
- Joined: Mon Sep 26, 2011 12:09 pm
- Your car is a: 1980 Fiat Pininfarina Spider 2000 F.I.
- Location: Ottawa, Ontario, Canada
Re: Cooling fan sensor-what temp?
hey Dan some temp sensors come on at different temps however, yours seems high (usually 190F) when I fist got Fiona her cabin was hot as well. I went with some heat padding see here http://forum.fiatspider.com/f08/viewtop ... ol#p140435
Jay
Fiona
1980 FI 2000 Spider
ITZEBTZE
https://goo.gl/photos/eNKaX7hrXhBu9fmp6
FINN (FN-2187)
2014 Jeep Wrangler Sport
MYTHERPY
Fiona
1980 FI 2000 Spider
ITZEBTZE
https://goo.gl/photos/eNKaX7hrXhBu9fmp6
FINN (FN-2187)
2014 Jeep Wrangler Sport
MYTHERPY
Re: Cooling fan sensor-what temp?
Dan,
I am planning on adding AC to a 1979. Did you pull your A/C? I am specifically looking for the compressor mounting bracket
Thanks
Scott
I am planning on adding AC to a 1979. Did you pull your A/C? I am specifically looking for the compressor mounting bracket
Thanks
Scott