Running power to garage and shed, pipe size.

Anything goes (within forum guidelines of course)
rlux4
Patron 2022
Patron 2022
Posts: 4211
Joined: Thu Jan 10, 2008 8:32 pm
Your car is a: 1982 2000 Spider
Location: Granite Falls, Wa

Re: Running power to garage and shed, pipe size.

Post by rlux4 »

I just have to add a couple of permit stories to this thread (sorry Rey). On my first job in Oxnard, Ca. I was in getting a permit and a city business license. First off, Oxnard charges twice what other cities out here charge for a business license, but when I looked at the total of the charges I saw a $10 "processing" fee. I asked what that was and was told it's for handling the transaction. "You charge me $10 to process the money you charge me to do business in your city!?" I asked. "Yes', he answered, 'and there's nothing you can do about it". I told him oh yeah, there's something I can do about it, I can stop doing business in your city. The next one was in the city of San Fernando. I was building a garage that was 5' off the property line. This put it within 10' of the block wall there. Because fire code calls for firewall on anything within 10' feet of a structure they made me firewall the garage, just in case, you know, the block wall caught on fire. :roll:
Ron
Ron Luxmore
rlux2n2@gmail.com
'82 2000 Spider: after 26 years between Spiders.
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Running power to garage and shed, pipe size.

Post by spiderrey »

No apologies necessary Ron.
User avatar
azruss
Posts: 3659
Joined: Sun May 30, 2010 12:24 pm
Your car is a: 80 Fiat 2000 FI

Re: Running power to garage and shed, pipe size.

Post by azruss »

Sorry for the long rant. I have dozens of more stories. Here is the bottom line. For every 10 commercial additions we are asked to do, 9 of them are abandoned because of the cost and difficulty of the permit process. always the difficulty isnt with the safety, it is with engineering requirements (ie have to have a sealed site plan even though they already have 2 or 3 on file from the previous property modification) or beautification (everything must be screened from sight with landscaping added, or moved to make room for more landscaping).
If these 9 abandoned projects had been completed it would have hired many workers and bought a lot of material. If you want economic stimulus, get these guys out of the way. We are approached by incoming businesses and asked what cities we would recommend setting up shop. we always tell them do NOT do business in Mesa, or Tempe because of the permit difficulty. It is not just us, we get the same bitch from every contractor that walks through our door. It is also interesting to look at the number of businesses moving to Arizona from California for this exact reason.
User avatar
RRoller123
Patron 2020
Patron 2020
Posts: 8179
Joined: Sun Nov 13, 2011 2:04 pm
Your car is a: 1980 FI SPIDER 2000
Location: SAGAMORE BEACH, MA USA

Re: Running power to garage and shed, pipe size.

Post by RRoller123 »

I love visiting CA, but it does seem to be running on fumes these days. Multiple cities going bankrupt, restrictive regulations, businesses fleeing, what a mess. Even MA isn't bad by comparison. My town gave me a business operating license in 2 days for $100 and a 1 page form. Piece of cake, no bribes, only restriction is signage and parking since I am in a residential area. never thought I would say that about MA. :roll:
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
dmwhiteoak
Posts: 1088
Joined: Mon Aug 15, 2011 1:12 pm
Your car is a: 1972 Fiat 124 spider
Location: White Oak Tx

Re: Running power to garage and shed, pipe size.

Post by dmwhiteoak »

So Rey, what is your plan now to run your wiring ? Seems to me as long as you follow code you will be fine. Good luck.
Dennis Modisette

1972 124 Spider
2003 Chevrolet Z71
2007 GMC Yucon
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Running power to garage and shed, pipe size.

Post by spiderrey »

Well I bought 50' of 1 inch pipe this mornin. 3 90,s, 1 45 and a few other odds. Also picked up a 60 amp box to mount next to my house panel. I couldnt figure out which sub panel I should use though. They had something like a 60 amp panel with 22 spaces and 4 something. dang my memory sucks. The next panel up was a little bigger with double the capacity. Gonna make sure the trench is 18 inches deep and get to laying the pipe. Thanx for ALL the info guys. You have been a great help.
User avatar
maytag
Posts: 1789
Joined: Mon Oct 19, 2009 9:22 pm
Your car is a: 1976 124 spider
Location: Rocky Mountains....UTAH! (Not Colorado)

Re: Running power to garage and shed, pipe size.

Post by maytag »

spiderrey wrote:Well I bought 50' of 1 inch pipe this mornin. 3 90,s, 1 45 and a few other odds. Also picked up a 60 amp box to mount next to my house panel. I couldnt figure out which sub panel I should use though. They had something like a 60 amp panel with 22 spaces and 4 something. dang my memory sucks. The next panel up was a little bigger with double the capacity. Gonna make sure the trench is 18 inches deep and get to laying the pipe. Thanx for ALL the info guys. You have been a great help.
Try something like this:
http://www.homedepot.com/Electrical-Bre ... EPJgJYkqvk
I'm no Boy-Racer..... but if I can't take every on-ramp at TWICE the posted limit.... I'm a total failure!
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Running power to garage and shed, pipe size.

Post by spiderrey »

Thanx Maytag. Ill check it out when I go back.
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Running power to garage and shed, pipe size.

Post by spiderrey »

Is this the right box for the house side?
Image
User avatar
maytag
Posts: 1789
Joined: Mon Oct 19, 2009 9:22 pm
Your car is a: 1976 124 spider
Location: Rocky Mountains....UTAH! (Not Colorado)

Re: Running power to garage and shed, pipe size.

Post by maytag »

spiderrey wrote:Is this the right box for the house side?
Image
perfect.
I'm no Boy-Racer..... but if I can't take every on-ramp at TWICE the posted limit.... I'm a total failure!
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Running power to garage and shed, pipe size.

Post by spiderrey »

Thank you.
steve8462

Re: Running power to garage and shed, pipe size.

Post by steve8462 »

hey Ron, you should move to Georgia. down here we build first and ask questions later if somebody even bothers to come by and inspect your work! i used to live in New England. up there you would get in touch with Vinny or Tony to help speed up the permit process and get any changes approved! :shock:
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Running power to garage and shed, pipe size.

Post by spiderrey »

O K, with plenty of unexpected help from my girlfriends son, and his buddy, I got alot done yesterday. Here is where Im at.
Image
Image
We ran into a 10 or 12 inch pipe at the garage that we had to bust through to get the line run. That part was time consuming.
Image
In the process we removed the existing line of power to the garage as it was in poor shape and only 7 inches down.
User avatar
azruss
Posts: 3659
Joined: Sun May 30, 2010 12:24 pm
Your car is a: 80 Fiat 2000 FI

Re: Running power to garage and shed, pipe size.

Post by azruss »

boy, i hope you didnt open up the neighborhood sewer line. :cry:
spiderrey
Posts: 2623
Joined: Sat Jan 28, 2006 2:08 pm
Your car is a: 70 124 spider-74x19-03 ranger edge
Location: San Dimas, Ca

Re: Running power to garage and shed, pipe size.

Post by spiderrey »

Oh, thats what that smell was. Seriously though, no sewer pipe is gonna be running through my back yard. this was a very old pipe, full of dirt with concrete around it. cant figure out what it was for. This used to be a ranch area from what Ive researched.
Post Reply