Are theses good for my 1608 rebuilt

[fiat218]

http://www.ebay.com/itm/NEW-OE-BORGO-PI ... 769wt_1026
Are they over priced,and will they be good

[So Cal Mark]

they aren't overpriced, 1608 pistons are hard to find that's why I've been having forged pistons made. The question would be are they the right size for your block. Have you miked the cylinders to see if it needs to be bored?

[fiat218]

they aren't overpriced, 1608 pistons are hard to find that's why I've been having forged pistons made. The question would be are they the right size for your block. Have you miked the cylinders to see if it needs to be bored?

I have not done anything, engine is in the garage yet, I was thinking of getting some parts and then get it all togetherr

[lanciahf]

I think 1608s had two types of wrist pins. You have to make sure yours are the same in the ad. I think you have to disassemble in order to tell the difference. Any 1608 experts on the board?

You might want to check the archives on Mira.

[fiat218]

I think 1608s had two types of wrist pins. You have to make sure yours are the same in the ad. I think you have to disassemble in order to tell the difference. Any 1608 experts on the board?

You might want to check the archives on Mira.

Nope! But u are right .it best taking it down before buying things

[narfire]

Same ones I bought from the same guy several years ago. They are still in the box. (have another 1608 engine I'm debating as to what to do with it)). I did recieve them finally but it took several (around 2 1/2) months and plenty of emails, calls and just about a road trip before they were sent. The money order had cleared a week after mailing it.
Chris

[fiat218]

Same ones I bought from the same guy several years ago. They are still in the box. (have another 1608 engine I'm debating as to what to do with it)). I did recieve them finally but it took several (around 2 1/2) months and plenty of emails, calls and just about a road trip before they were sent. The money order had cleared a week after mailing it.
Chris

I am going to try rebuild this engine to the max potential ,so we see, lot of help from here and I can do it,oh I'm not the mechanic either lol, I have to hire it out