1980 Spare wheel well
- divace73
- Posts: 1380
- Joined: Sun Oct 17, 2010 5:59 am
- Your car is a: 1980 Fiat 124 Spider Silver
- Location: Sydney, Australia
1980 Spare wheel well
I have a 1980 and I have noticed that my spare tyre just sits in the tyre well, there isn't the mounting nut to screw a bolt into, is this 'normal' for a 1980 OR has some PO removed it along the way, I do recall seeing them on the earlier models....
Cheers David
-=1980 silver Fiat 124 Spider=-
If you want to see pics of my car (and other random stuff) >>click here<< OR
see my >>You tube channel<<
-=1980 silver Fiat 124 Spider=-
If you want to see pics of my car (and other random stuff) >>click here<< OR
see my >>You tube channel<<
- 4uall
- Posts: 4145
- Joined: Mon Sep 26, 2011 12:09 pm
- Your car is a: 1980 Fiat Pininfarina Spider 2000 F.I.
- Location: Ottawa, Ontario, Canada
Re: 1980 Spare wheel well
mine is the same...............so I assume so there is no bracket or hole where it would mount
Jay
Fiona
1980 FI 2000 Spider
ITZEBTZE
https://goo.gl/photos/eNKaX7hrXhBu9fmp6
FINN (FN-2187)
2014 Jeep Wrangler Sport
MYTHERPY
Fiona
1980 FI 2000 Spider
ITZEBTZE
https://goo.gl/photos/eNKaX7hrXhBu9fmp6
FINN (FN-2187)
2014 Jeep Wrangler Sport
MYTHERPY
- RRoller123
- Patron 2020
- Posts: 8179
- Joined: Sun Nov 13, 2011 2:04 pm
- Your car is a: 1980 FI SPIDER 2000
- Location: SAGAMORE BEACH, MA USA
Re: 1980 Spare wheel well
Same with mine (1980 FI), although I think it is whacky that the tire just sits there. Not a good idea in case of a serious accident.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
- 81SPIDERMATT
- Posts: 1239
- Joined: Mon Oct 11, 2010 5:10 pm
- Your car is a: 1981 spider 2000
- Location: FORT COLLINS, CO
Re: 1980 Spare wheel well
the accident i am planning for.... that loose tire will be the least of my worries..... but mine is the same alsoRRoller123 wrote:Same with mine (1980 FI), although I think it is whacky that the tire just sits there. Not a good idea in case of a serious accident.
- RRoller123
- Patron 2020
- Posts: 8179
- Joined: Sun Nov 13, 2011 2:04 pm
- Your car is a: 1980 FI SPIDER 2000
- Location: SAGAMORE BEACH, MA USA
Re: 1980 Spare wheel well
Not a good idea to have an item weighing that much bouncing around in an accident, especially with the gas tank and lines literally only a few inches away... I definitely plan to secure the spare tire somehow when I put in new trunk boards. Also am adding the Ford inertial switch too, to help make sure the fuel pump doesn't keep running. Maybe Don will post his pic of how he installed his? The sad reality is that in a serious accident in these cars, there is a really good chance of getting trapped inside by squished body or door metal. Having a soft top is an advantage, but the car's sheet metal is thin and there is basically no protection. Don't want to be morbid, but a wise person prepares as well as can be done.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
- azruss
- Posts: 3659
- Joined: Sun May 30, 2010 12:24 pm
- Your car is a: 80 Fiat 2000 FI
Re: 1980 Spare wheel well
a wise person drives a volvo. would be pretty simple to mount a long bolt from under the trunk floor to secure the spare. the spare is contained pretty good and dont think it would come flying out of its hole with the trunk closed.
- RRoller123
- Patron 2020
- Posts: 8179
- Joined: Sun Nov 13, 2011 2:04 pm
- Your car is a: 1980 FI SPIDER 2000
- Location: SAGAMORE BEACH, MA USA
Re: 1980 Spare wheel well
I saw somewhere an older Spider and that is exactly what it had, a heavy threaded vertical post that was welded to the floor and centered the tire, with a plate and a large wing nut on top that could be tightened by hand. Why would they have stopped doing that? Makes no sense to me. Anyway I ain't wise by any means, but I did drive Volvos for about 25 years, gave them up when they went yuppie-expensive. The 245 Turbo wagon was fun but my 240 sedan did 300,000 miles with the original clutch and no internal engine work at all. (7) sets of tires and about 80 oil changes later, ended up selling it for $800 to a very enthusiastic buyer. LOL.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
- DocGraphics
- Posts: 639
- Joined: Sat Mar 19, 2011 6:43 pm
- Your car is a: 1978 124 spider
- Location: Coeur d'Alene Idaho
Re: 1980 Spare wheel well
Here's a pic of my 78 trunk showing the spare hold down that they put in the earlier Spiders
Don Raugust
1978 Fiat 124 Spider "Fiona" - Burgundy/Tan
2011 pics: http://s918.photobucket.com/albums/ad22 ... 0Pictures/
2012 pics: http://s918.photobucket.com/albums/ad22 ... cs%202012/
1978 Fiat 124 Spider "Fiona" - Burgundy/Tan
2011 pics: http://s918.photobucket.com/albums/ad22 ... 0Pictures/
2012 pics: http://s918.photobucket.com/albums/ad22 ... cs%202012/
- RRoller123
- Patron 2020
- Posts: 8179
- Joined: Sun Nov 13, 2011 2:04 pm
- Your car is a: 1980 FI SPIDER 2000
- Location: SAGAMORE BEACH, MA USA
Re: 1980 Spare wheel well
Yeah that's it, why would they stop that? Or did they tend to shear off maybe?
Nice looking trunk btw! No rust in that puppy.
Nice looking trunk btw! No rust in that puppy.
'80 FI Spider 2000
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
'74 and '79 X1/9 (past)
'75 BMW R75/6
2011 Chevy Malibu (daily driver)
2010 Chevy Silverado 2500HD Ext Cab 4WD/STD BED
2002 Edgewater 175CC 80HP 4-Stroke Yamaha
2003 Jaguar XK8
2003 Jaguar XKR
2021 Jayco 22RB
2019 Bianchi Torino Bicycle
- DocGraphics
- Posts: 639
- Joined: Sat Mar 19, 2011 6:43 pm
- Your car is a: 1978 124 spider
- Location: Coeur d'Alene Idaho
Re: 1980 Spare wheel well
Thanks, nope no rust, just a good clean-up & repaint last year.
Don Raugust
1978 Fiat 124 Spider "Fiona" - Burgundy/Tan
2011 pics: http://s918.photobucket.com/albums/ad22 ... 0Pictures/
2012 pics: http://s918.photobucket.com/albums/ad22 ... cs%202012/
1978 Fiat 124 Spider "Fiona" - Burgundy/Tan
2011 pics: http://s918.photobucket.com/albums/ad22 ... 0Pictures/
2012 pics: http://s918.photobucket.com/albums/ad22 ... cs%202012/
- divace73
- Posts: 1380
- Joined: Sun Oct 17, 2010 5:59 am
- Your car is a: 1980 Fiat 124 Spider Silver
- Location: Sydney, Australia
Re: 1980 Spare wheel well
what bothers me the most is when going over speed humps or the like with a bit of speed and spare tyre jumps up and down as well, I do have some bitd from a BC that I will get welded then I get the chance..
Cheers David
-=1980 silver Fiat 124 Spider=-
If you want to see pics of my car (and other random stuff) >>click here<< OR
see my >>You tube channel<<
-=1980 silver Fiat 124 Spider=-
If you want to see pics of my car (and other random stuff) >>click here<< OR
see my >>You tube channel<<