Thought I would try here, having no luck in other index

4uall · Post by **4uall** » Tue Apr 24, 2012 11:31 am

4uall wrote:does anybody have a set of seat belt holder sleeves (hard plastic) ? or know the best place to purchase?

http://www.blueovalindustries.com/media ... eeve_1.jpg

seabeelt · Post by **seabeelt** » Tue Apr 24, 2012 12:40 pm

Don't know of any place other than what you have posted. Have you considered something similar out of another type used car (junk yard wreck)?

4uall · Post by **4uall** » Tue Apr 24, 2012 12:53 pm

I have however, I do not believe there are any junkyards near where I live. I am sure i will find some somewhere

jfrawley · Post by **jfrawley** » Tue Apr 24, 2012 4:41 pm

Here's where we get ours. They require some triming but look pretty good when installed.

http://www.gotbelts.com/mounting-hardwa ... 4/view/241

So Cal Mark · Post by **So Cal Mark** » Tue Apr 24, 2012 8:06 pm

Fiat used several different belts over the years, can you post a pic of what you have?

4uall · Post by **4uall** » Tue Apr 24, 2012 9:23 pm

POR15 Passenger side by itzebtze, on Flickr

rlux4 · Post by **rlux4** » Wed Apr 25, 2012 9:08 am

Denise gave me a pair when I needed them. She had a pair that came off of a Chevy of some sort, might even have been a pickup. She'd gotten them from a wrecking yard if I recall, you might try that. They ended up working perfectly and the color match was very close.
Ron

mdrburchette · Post by **mdrburchette** » Sun Apr 29, 2012 8:45 am

they came from a late 90's or early 2000's model GM vehicles. I may have a couple more left but they will have to be dyed to match your interior. Here's a pic of one. You just remove the staple and pull the belt out of the holder, trim to fit your belt, and viola, you have a new seatbelt holder:

4uall · Post by **4uall** » Sun Apr 29, 2012 12:50 pm

I am not particular about the colour, Ideally beige or black will do. Keeping me eye open here at home. So far no such luck

dantye · Post by **dantye** » Sun Apr 29, 2012 3:51 pm

jfrawley wrote:Here's where we get ours. They require some triming but look pretty good when installed.

http://www.gotbelts.com/mounting-hardwa ... 4/view/241
Here's where we get ours. They require some triming but look pretty good when installed.

The site listed in the above post did not work for ordering. It failed to provide a place shipping rate input, then chewed you out for not entering it. Maybe they were bought out or maybe it is a temporary problem. At any rate, I ordered from:

https://www.seatbeltplanet.com/seatbelt ... 28/view/73

Except for the firm name, the presentation, content and product line appear to be exactly the same - It is either a buyout or an off-shore pyramid source. For the price, I took a chance.

4uall · Post by **4uall** » Sun Apr 29, 2012 5:33 pm

having a tough time justifying the shipping cost vs the product cost. Guess the plastic is gold plated

USPS Priority International Flat Rate - $32.95
UPS Canada Standard - $19.60 (which will add duty & brokerage fees +$30.00)
UPS Worldwide Express - $82.99
UPS Worldwide Expedited - $76.27

dantye · Post by **dantye** » Sun Apr 29, 2012 5:49 pm

4uall wrote:having a tough time justifying the shipping cost vs the product cost. Guess the plastic is gold plated

USPS Priority International Flat Rate - $32.95
UPS Canada Standard - $19.60 (which will add duty & brokerage fees +$30.00)
UPS Worldwide Express - $82.99
UPS Worldwide Expedited - $76.27

Don't know where that came from. This is from the actual order page; Flat rate is 5 bucks:

UPS Next Day Air Early AM - $94.34
UPS Next Day Air - $59.00
UPS Next Day Air Saver - $54.26
UPS 2nd Day Air - $23.83
UPS 3 Day Select - $19.15
UPS Ground - $13.15
Flat Rate - $5.00

Being a web designer, I would not be surprised if there is wrong info on some other page of the site, but I paid via PayPal and the order went through just fine. I guess some of those shipping rates are for the guy who has to have it ready for Pebble Beach next weekend. (Although I'm not expecting Pebble Beach quality for this price!)

mdrburchette · Post by **mdrburchette** » Sun Apr 29, 2012 6:05 pm

Jay, email me if you want me to send you what I have. I can send them to Canada as a gift so it doesn't cost an arm and leg. spyderlady71@yahoo.com

dantye · Post by **dantye** » Sun Apr 29, 2012 6:23 pm

Sorry, folks. I missed the Maple Leaf!

4uall · Post by **4uall** » Sun Apr 29, 2012 7:22 pm

"free trade" is an oxymoron

Thought I would try here, having no luck in other index

Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index

Re: Thought I would try here, having no luck in other index