Whoa 14" kit and vented rotors wanted, who has in stock

surfingfreeman · Post by **surfingfreeman** » Tue Apr 03, 2012 10:28 pm

Hi All
Looking for new brake set-up, but looks like everyone is out of stock? Any ideas? Thanks
Mike

narfire · Post by **narfire** » Tue Apr 03, 2012 11:49 pm

Not sure but I thought TAROX made a system for spiders. Try Geo Clemente
http://clementeeuropeanmotorsautosport.com/
He has a set mounted on his Alfa.
Give him a call

The picture for the brakes is kinda cool as well....
Chris

So Cal Mark · Post by **So Cal Mark** » Tue Apr 03, 2012 11:56 pm

I heard that the vented rotors for those kits were now out of production

Kent124 · Post by **Kent124** » Wed Apr 04, 2012 6:28 am

The 14" kit is just the 13" kit with extension hardware to handle 10" rotors. Midwest-Bayless shows they carry the 13" kit and extension hardware.

Try pinging Midwest-Bayless or International Auto Parts (IAP) about larger rotors that work with the 14" kit.

rlux4 · Post by **rlux4** » Wed Apr 04, 2012 8:06 am

I thought Jon Logan at Midwwest 124 bought the rights to Whoa brake kits. http://midwest124.com/
Ron

Kent124 · Post by **Kent124** » Wed Apr 04, 2012 9:41 am

rlux4 wrote:I thought Jon Logan at Midwwest 124 bought the rights to Whoa brake kits. http://midwest124.com/
Ron

I don't know the details to rights. But I bought my 13" kit from Jon Logan last spring but he referred me to Midwest-Bayless for the extension kit during the winter.

Jon no longer has cart checkout because of costs but I think you can still order the kit directly from him. If so I would go that route. Also order the stainless steel brake hose kit for the rear. Definitely worth installing.

rrrrob · Post by **rrrrob** » Wed Apr 04, 2012 5:39 pm

I'm currently looking at adding this same system, and have been doing a bit of research on parts, etc, as well. I didn't realize that break rotors came with the kit. I've only seen the kit listed without rotors. While searching for rotors I herd that EBC Brakes made slotted and dimpled sport rotors that fit. So far all I've found is the ones in the link below. They are listed for X19's though, and sense the spindles are different on the two I'm not sure they would work on a spider.

http://www.summitracing.com/parts/EBC-GD041/

rrrrob · Post by **rrrrob** » Wed Apr 04, 2012 5:48 pm

Found a link

http://ebcrotors.com/c-62_fiat-124spide ... otors.aspx

rrrrob · Post by **rrrrob** » Wed Apr 04, 2012 9:23 pm

also

http://www.autoricambi.us/cgi/commerce. ... =BR3-412-Z

surfingfreeman · Post by **surfingfreeman** » Wed Apr 04, 2012 10:58 pm

Thanks all for the ideas, Rob nice find with the EBC slotted rotors should be interesting to hear what Matt from Midwet-Bayless has to say about compatability with the Whoa series 2 caliper. I have the EBC greenstuff pads up front and like them a lot. Thanks again
Mike

Whoa 14" kit and vented rotors wanted, who has in stock

Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock

Re: Whoa 14" kit and vented rotors wanted, who has in stock