To restore or not...that is the question

This is the place to discuss restoration problems, post questions or projects-complete or partial.
HiFiSpi77

To restore or not...that is the question

Post by HiFiSpi77 »

Here she is....

Image

Image

Image

$500.00+new clutch cable ($21.90 with shipping)+ $15.31 in gas= Driving home

However...it squirmed all over when applying power or letting off, hard to start, tapping from engine, brake booster leaking, roof/interior is shot, some rust here and there, hoses to nowhere in engine compartment, large hole in driver side floor pan under pedals, etc

Then again...it did make it home under it's own power, 4 good tires and rims, windshield intact (surround has heavy rust in one spot though), lights work, brakes work, it's a cool car... did I mention it made it home under it's own power?

Are their any problems that make it useless to try to restore this car? I'd like it to look pretty good, drive well and be somewhat reliable. I'd appreciate any advise I can get.
dmwhiteoak
Posts: 1088
Joined: Mon Aug 15, 2011 1:12 pm
Your car is a: 1972 Fiat 124 spider
Location: White Oak Tx

Re: To restore or not...that is the question

Post by dmwhiteoak »

I'm sure you will get alot of opinions on this matter so here is mine. How much work do you want to put into it? Check the shock towers and see what condition they are in. If it made it home on it's own power then maybe it really wants to live and not be destined to be a parts car. There are many more knowledgeable people than me on this forum but I say if nothing major needs replaced and it makes you happy, go for it.
Dennis Modisette

1972 124 Spider
2003 Chevrolet Z71
2007 GMC Yucon
User avatar
maytag
Posts: 1789
Joined: Mon Oct 19, 2009 9:22 pm
Your car is a: 1976 124 spider
Location: Rocky Mountains....UTAH! (Not Colorado)

Re: To restore or not...that is the question

Post by maytag »

for me, the biggest factor in a car being a good candidate for restoration (or resto-mod) is the level of rust. How bad is it?
I'm no Boy-Racer..... but if I can't take every on-ramp at TWICE the posted limit.... I'm a total failure!
narfire
Posts: 3959
Joined: Sat Dec 27, 2008 2:14 am
Your car is a: 1980 124 spider
Location: Naramata B.C.

Re: To restore or not...that is the question

Post by narfire »

Shock towers is a good place to start. They are replaceable if shot but you likely might find more rust issues as you get into it.
How much do you want to spend,how much can you do yourself? body work skills or mechanical only? (shop rates..$60-$90/hr)
What is the interior like? If it squirms all over the road, perhaps a rebuild of the front end and alignment would be in order. Tapping in the engine, perhaps just an adjustment of the valve shims or something else. Swap out the timing belt, flex disk, hows the driveshaft center bearing, u-joints?.... If the car was cheap enough to purchase, these things can be addressed with a modicum of skill and simple tools and a couple of manuals. Parts I believe are relatively inexpensive compared to other cars I've owned and the vendors carry everything you will need to get the job done.
There is a thred somewhere here called..."project creep" if funds are available this is becomes a serious affliction that can result in a totally restored car with a hot engine and a s... eating grin on your face (to e'll with the empty wallet)
decisions decisions eh..
Chris
80 FI spider
72 work in progress
2017 Golf R ( APR Stg. 1)
2018 F350 crew long box
User avatar
maytag
Posts: 1789
Joined: Mon Oct 19, 2009 9:22 pm
Your car is a: 1976 124 spider
Location: Rocky Mountains....UTAH! (Not Colorado)

Re: To restore or not...that is the question

Post by maytag »

narfire wrote: There is a thred somewhere here called..."project creep" if funds are available this is becomes a serious affliction that can result in a totally restored car with a hot engine and a s... eating grin on your face (to e'll with the empty wallet)
decisions decisions eh..
Chris
HEy! That's MY thread! I'm famous! :lol:

But seriously, Narfire is right. decide what your plan is first, and stick to it. Otherwise, it can get waaay out of hand.
I'm no Boy-Racer..... but if I can't take every on-ramp at TWICE the posted limit.... I'm a total failure!
User avatar
engineerted
Posts: 531
Joined: Tue Feb 21, 2006 9:57 pm
Your car is a: 1974 124 spider
Location: Farmington Hills, MI

Re: To restore or not...that is the question

Post by engineerted »

Wow it looks alot better than what i started with!

Image

Here is what 3years and lots of $$ will get you, First place at Freakout 2006

Image
Ted
1978 124 Spider, Complete Restoration
1974 Fiat 124 F Production Race car
baltobernie
Patron 2020
Patron 2020
Posts: 3466
Joined: Sun Nov 25, 2007 6:00 pm
Your car is a: 1973 Spider [sold]
Location: Baltimore, MD

Re: To restore or not...that is the question

Post by baltobernie »

http://www.fiatspider.com/f08/viewtopic.php?f=3&t=3339

A few years later, more than a few thousand dollars later, and I too have a Best in Class award. (Donning all of his hockey equipment, including the helmet).... Bring on your sticks and stones, but if you're looking for a knock-around roadster, get yourself a used Miata. You'll spend less on the entire car than an engine and transmission rebuild on a Spider and you'll have a modern, safe, reliable roadster.

A vintage Fiat Spider (or a vintage MG, or a vintage anything) is not a good choice for an occasional-use, fun car. Our Spiders are from, literally, the Middle Ages of automobiles. Yes, they are beautiful, elegant and unique. They require, however, a continual commitment in time and money to make them roadworthy, and even a ground-up, $30k restoration won't give you the comfort, safety and reliability of a modern car. Ya gotta really want a vintage car to put up with the shortcomings.
Last edited by baltobernie on Fri Mar 23, 2012 4:40 pm, edited 1 time in total.
Jimb
Posts: 740
Joined: Mon May 05, 2008 1:03 am
Your car is a: 1985.5 Volumex

Re: To restore or not...that is the question

Post by Jimb »

baltobernie wrote:http://www.fiatspider.com/f08/viewtopic.php?f=3&t=3339
but if you're looking for a knock-around roadster, get yourself a used Miata. You'll spend less on the entire car than an engine and transmission rebuild on a Spider and you'll have a modern, safe, reliable roadster.

A vintage Fiat Spider (or a vintage MG, or a vintage anything) is not a good choice for an occasional-use, fun car. Our Spiders are from, literally, the Middle Ages of automobiles. Yes, they are beautiful, elegant and unique. They require, however, a continual commitment in time and money to make them roadworthy, and even a ground-up, $30k restoration won't give you the comfort, safety and reliability of a modern car. Ya gotta really want a vintage car to put up with the shortcomings.
Sorry, but I disagree. Granted I've not owned my Volumex for a great long time....but for the few years I have owned it my wife and I have used it often as a summer weekender out for coffee and car shows kind of driver, and it has been a bucket of fun and absolutely dependable. In fact nothing has gone wrong with it. Just gas and oil changes.
And when I sell her I expect I'll get my money back....something I can't say about a Miata.
Cheers,
Jim
baltobernie
Patron 2020
Patron 2020
Posts: 3466
Joined: Sun Nov 25, 2007 6:00 pm
Your car is a: 1973 Spider [sold]
Location: Baltimore, MD

Re: To restore or not...that is the question

Post by baltobernie »

Yeah, well, perhaps I got a little carried away. My car is now (reasonably) sorted, and like your Volumex, she probably won't require a great deal of effort to keep her that way.

But we see a lot of guys who've bought $1000 Spiders and expect to throw a couple hundred dollars at them and drive off into the sunset, happily ever after. Their enthusiasm often evaporates a few thousand dollars later.

HiFi, you might want to sit down with a catalog or three from our great vintage Fiat parts suppliers, and just start adding up dollars of all the things you know are wrong with the car. In addition to money, you'll need time, workspace, tools and patience to make this car "look pretty good, drive well and be somewhat reliable".
User avatar
engineerted
Posts: 531
Joined: Tue Feb 21, 2006 9:57 pm
Your car is a: 1974 124 spider
Location: Farmington Hills, MI

Re: To restore or not...that is the question

Post by engineerted »

The nice thing about taking on a project like this is, all those new tools you get to buy. :D
There is alot said about doing the work youself, but if i had to do it again, I would look long and hard for a rust free car!
On the bright side, welding in sheet metal, no big thing now.


Ted
Ted
1978 124 Spider, Complete Restoration
1974 Fiat 124 F Production Race car
mscafide
Posts: 330
Joined: Fri Jan 23, 2009 6:59 pm
Your car is a: 1974 124 Spider
Location: Pompano Beach, Florida

Re: To restore or not...that is the question

Post by mscafide »

Ted is right, a rust free car is the best place to start but nobody will pay for a rust free car.

Everybody knows you can buy a few parts, weld it up and you will be as good as new while saving lots of money.

What would a rust free shell be worth these days? I tried to sell one a few years ago but there were no takers. At the time, I wanted 2 or 3 grand. Too much?

Mike
1974 124 Spider
1964 500 D
2012 500 Sport
1948 Ford 8N tractor (restored (don't drink and ebay))
User avatar
124JOE
Posts: 3141
Joined: Fri Jun 24, 2011 7:11 pm
Your car is a: 1978 124 fiat spider sport 1800
Location: SO. WI

Re: To restore or not...that is the question

Post by 124JOE »

yep do it
she needs you
when you do everything correct people arent sure youve done anything at all (futurama)
ul1joe@yahoo.com 124joe@gmail.com
User avatar
maytag
Posts: 1789
Joined: Mon Oct 19, 2009 9:22 pm
Your car is a: 1976 124 spider
Location: Rocky Mountains....UTAH! (Not Colorado)

Re: To restore or not...that is the question

Post by maytag »

mscafide wrote:Ted is right, a rust free car is the best place to start but nobody will pay for a rust free car.

Everybody knows you can buy a few parts, weld it up and you will be as good as new while saving lots of money.

What would a rust free shell be worth these days? I tried to sell one a few years ago but there were no takers. At the time, I wanted 2 or 3 grand. Too much?

Mike
ha!
check THIS out:

http://www.fiatspider.com/f08/viewtopic ... 11&t=16585

could hardly GIVE it away.
I'm no Boy-Racer..... but if I can't take every on-ramp at TWICE the posted limit.... I'm a total failure!
mscafide
Posts: 330
Joined: Fri Jan 23, 2009 6:59 pm
Your car is a: 1974 124 Spider
Location: Pompano Beach, Florida

Re: To restore or not...that is the question

Post by mscafide »

I remember that. I've learned my lesson and buy the best I can afford because it's cheaper.

When I wanted an early 500 I paid a lot for a nice one and I would do the same for a Spider or anything else. You also get to use it sooner too. BTW, what did you think you could get for the shell?

My shell had Koni reds, a rear sway bar and only about 28K miles on it so the ball joints and other parts were young as far as driving time AND it was Ziebarted. You get what you pay for.

Mike
1974 124 Spider
1964 500 D
2012 500 Sport
1948 Ford 8N tractor (restored (don't drink and ebay))
FiatFever

Re: To restore or not...that is the question

Post by FiatFever »

I restore cars for as a hobby. Run from that dream car that has enough rust to make yourself question if it's too much rust.
The exception being floor pans. All of the cars below will be completed this month. It's only possible because all were kept from the elements for years.

The cars currently underway now are the 124 Spider, which is my first Fiat.
a 70's Fiat 500 ,Shipped to the US by aoneone in the service , and left it.
65 mustang, barn find.
66 F-100, stored in a barn by a farmer.
( 2 )1971 Jeep Grand Wagoneers, AZ cars
71 VW Karmann Ghia Vert, one owner car only driven in the summer by a dentists wife in PA.
Luckiest find of my life.
Post Reply