1974 Spider - Installing new doors - NEED HELP PLEASE

This is the place to discuss restoration problems, post questions or projects-complete or partial.
Post Reply
Ianidjar

1974 Spider - Installing new doors - NEED HELP PLEASE

Post by Ianidjar »

Hi everyone,

I just got new doors from someone last week (same colour car but his doors had mirrors and a locking key - which i didnt have so i took both). Now here is the issue, i've taken off my doors and do not know how to get the new doors on. I see how they should be mounted but i cant imagine where the screw would go into seeing how big the holes are....

any ideas if i'm missing something to screw the bolt into... the bolts i took off were attached to something that might have fallen into the car....

Please help!!!

Thanks!
IA
azygoustoyou

Re: 1974 Spider - Installing new doors - NEED HELP PLEASE

Post by azygoustoyou »

Do you have the hinges on the doors?
htchevyii
Patron 2022
Patron 2022
Posts: 1807
Joined: Thu Jan 17, 2008 9:31 pm
Your car is a: 1982 Spider hers 1972 Spider his
Location: Hydesville, CA (NorCal)

Re: 1974 Spider - Installing new doors - NEED HELP PLEASE

Post by htchevyii »

I'm not really sure what to make of your situation, but there's usually a plate with nuts attached that floats inside of the mounting holes and allows for adjustment. Could this have shifted or fallen? Pics might help,.
Trey
Image
1982 SPIDER 2000, 1964 CHEVYII, 1969 Chevy Nova, 2005 DODGE RAM, 1988 Jeep Comanche
1972 Spider, 78 Spider rat racer 57 f-100,
User avatar
124JOE
Posts: 3141
Joined: Fri Jun 24, 2011 7:11 pm
Your car is a: 1978 124 fiat spider sport 1800
Location: SO. WI

Re: 1974 Spider - Installing new doors - NEED HELP PLEASE

Post by 124JOE »

if your mounting nut bracket fell inside
remove the lower kick pannel and find them
set them back in place or have someone hold them while you bolt it up.joe
when you do everything correct people arent sure youve done anything at all (futurama)
ul1joe@yahoo.com 124joe@gmail.com
Ianidjar

Re: 1974 Spider - Installing new doors - NEED HELP PLEASE

Post by Ianidjar »

HI, yes i'm thinking the mounting nut bracket fell.
Any ideas on what it looks like?
I cannot remove the lower kick panel since the car seems completely welded together... so i cannot find a point of entry. Any ideas on how to move on this?


thanks again!
IA
User avatar
azruss
Posts: 3659
Joined: Sun May 30, 2010 12:24 pm
Your car is a: 80 Fiat 2000 FI

Re: 1974 Spider - Installing new doors - NEED HELP PLEASE

Post by azruss »

the bolt plates are loosely encapsulated in metal boxes. yours are probably still in there someplace. if not, you have some fab work to do.

Image
Ianidjar

Re: 1974 Spider - Installing new doors - NEED HELP PLEASE

Post by Ianidjar »

azruss thank you so much for the help.
I didnt reply since i found something out that was sad.
the bolts fell through and were melted in by the last owner because the doors were not being held by the body anymore... so now i've decided to part the car out.

I have 2 sets of doors to sell now both yellow hahhaa

thanks for all the help to everyone!
IA
Post Reply