replacing bushings in anti-swaybar

[dmwhiteoak]

I replaced the outer bushings in the swaybar last week but was not sure how the two center bushing brackets come off. I lightly tried to pry the brackets off the old bushings but didn't want to tear them up. Are they rivited together or just pressed. Its a 78 spider.thanks Dennis

[Divers]

You have to drill out where they are swedged together at the bolt hole.

[manoa matt]

This will help: http://mirafiori.com/faq/content/sbbush ... shings.htm

[htchevyii]

If you don't get too crazy with the drill, (just drill thru the swedged part on the back), then the hole will still be the correct diameter. Midwest 124 used to sell the new inner bracket pretty cheap , you can just clamp them togeather and re swedge them with a ball pein hammer.

[manoa matt]

Classicricambi.com has the new brackets as a set, pretty cheap too.

[htchevyii]

I looked for them before posting says "sold out" and Midwest 124 is down for maintanence

[dmwhiteoak]

thanks for all the help.I think I will do the drill method.
Dennis