Is there adjustment in the top latches?

jamie mccormick · Post by **jamie mccormick** » Wed Aug 08, 2007 8:48 pm

Just swapped out complete windshield and frame on 80 Spider

.Now dr side top latch does not want to fit into receiver on top of windshield frame its out enough that I can't force it into place(off to the side).So does any body know if there any adjustment I can make.All else seems to fit well .Thanks

mdrburchette · Post by **mdrburchette** » Wed Aug 08, 2007 9:26 pm

What year was the windshield frame from?

manoa matt · Post by **manoa matt** » Wed Aug 08, 2007 9:42 pm

When I reversed mine they worked better

jamie mccormick · Post by **jamie mccormick** » Wed Aug 08, 2007 9:42 pm

ITs been awhile since i bought it,but somehow I think it was a 79?

jamie mccormick · Post by **jamie mccormick** » Wed Aug 08, 2007 9:46 pm

Thanks I will try switchin em!!

mbouse · Post by **mbouse** » Thu Aug 09, 2007 1:46 pm

if you just loosen those clamps by loosening the phillips screws, there is some side to side play. might be enough play to make the adjustment.

would be better than removing both sides and reinstalling them both, especially when one side sounds like it is working just fine.

also, if you are interested, i may have some other clamps from the parts car available.